Experience ultimate convenience with the Vantrix Automated Wind Sensor Legless Electric Side-Mounted Awning. This premium powered shade system is designed for high-end camper vans and luxury RV conversions. Featuring a legless, cantilevered design, it provides an unobstructed outdoor living area with the added safety of an automated retraction system. Why Choose the Vantrix Automated Awning? (Luxury Meets Intelligence) Elevate your off-grid experience with the pinnacle of awning technology. The Vantrix Automated Electric Awning isn't just a shade—it's an intelligent extension of your living space. Designed for those who appreciate luxury and peace of mind, this unit handles the hard work for you so you can focus on the view. Effortless Luxury: Forget about manual cranking. With a single touch, your outdoor patio expands or retracts, powered by a high-torque 12V motor. | Seamless integration with your van's power grid Self-Protecting Intelligence: The built-in vibration sensor acts as a 24/7 guard. If a sudden storm or gust hits while you're away on a hike, the awning automatically stows itself to prevent damage. | Smart safety technology for worry-free travel The Unobstructed View: Our legless cantilever design means no more poles to trip over and no obstructed views. You get a completely open 360-degree entryway to your sliding door. | Maximum architectural aesthetic and freedom of movement Stealth and Strength: Housed in a premium architectural-grade aluminum cassette, the awning stays protected and aerodynamic when you're on the highway. | Stealth black finish for a professional, high-end look When you demand the best in safety, convenience, and modern design, the Vantrix Automated Awning is the clear choice for your luxury build. Smart Technology & Legless Design The Vantrix Electric Awning eliminates the need for manual cranking and ground legs, creating a seamless transition from your van to the outdoors. Intelligent Wind Sensing: Integrated vibration sensor automatically stows the awning during sudden gusts to protect your hardware. | 24/7 automated protection system Legless Cantilever Design: Heavy-duty reinforced arms provide overhead support without poles for an unobstructed 360-degree entryway. | Eliminates trip hazards and site obstructions Hands-Free Protection: Automatic self-retraction provides peace of mind while you're away from the vehicle. | Intelligent sensor-driven safety Emergency Manual Override: Includes a built-in manual port for retraction in the event of a power loss. | Reliable backup for off-grid security Technical Specifications Operation: 12V DC Powered Motor | Automatic Extension and Retraction. | High-torque industrial motor Available Sizes: 118" (3m) and 157" (4m) lengths. | Optimized for full-size van wheelbases Extension Depth: Projects up to 8.2 Feet (2.5m). | Expansive square footage for outdoor living Fabric: UV-Resistant PVC-Coated Vinyl | Waterproof and Flame Retardant. | High-durability commercial grade material Housing: Architectural Grade Aluminum Cassette | Rust-Proof Powder Coated Finish. | Weather-sealed protective storage Aesthetics: Stealth Black, low-profile aerodynamic housing. | Matches modern van exterior trim Power & Installation Requirements This unit is designed for professional integration into your van's electrical system. Power Requirement: Dedicated stable 12V DC power source. | Low-draw high-efficiency motor Control: Compatible with the included wall switch or remote control system. | Versatile remote power management System Integration: Can be integrated with most modern van management systems. | Compatible with smart-hub electrical builds Note: Professional electrical routing and installation are highly recommended due to the motorized components and sensor calibration. | Ensures long-term mechanical reliability *Aftermarket component not affiliated with any specific vehicle OEM. What’s Included 1 × Vantrix Electric Awning Unit 1 × 12V High-Torque Motor Assembly 1 × Automated Wind Vibration Sensor 1 × Professional Wiring Harness 1 × Wireless Remote / Wall Switch Kit Full Mounting Hardware | Includes brackets for standard roof rack fitment

The NovaLux Solo GT isn't just another RV seat — it's the solution we built because what we needed didn't exist. Designed by van builders for van builders, the Solo GT was built to solve the "family fit" problem. Whether you're working with a compact mid-size van or a full-size high-roof build, this seat slides, reclines, and gives you a comfortable spot without eating up your floor plan. The Story: Built for the Van Life Reality Most RV seats are designed for motorhomes, leaving van builders with bulky options that don't fit a "family-first" layout. We spent years in the shop realizing that builders needed a seat that was actually versatile. We took matters into our own hands to design a seat that accounts for every inch: Small Van Friendly: Narrow footprint so you can keep your aisle space and cabinetry. Builder-Grade Customization: We chose the materials, colors, and leg-rest mechanics to stand up to off-grid use. Slide & Recline: Adjustable in tight quarters, giving your passengers a captain's chair experience even in a DIY build. The "GT" (Grand Touring) represents long-haul comfort. From breathable upholstery to the ergonomic leg rest, every detail was thought through by the team at Big Bear Vans. What's in the Box? (Build Your System) Every van layout is unique. We've made our mounting system modular so you only pay for the hardware your specific build needs. Note: Our hardware is engineered specifically for the NovaLux seat and is not sold separately for other seat brands. Solo GT Seat (Core): Includes (1) Solo GT Seat with integrated 3-point seat belt and adjustable leg rest. + 360° Swivel Base (Optional Add-on): Add this if you need the seat to rotate for a "living room" layout. Includes heavy-duty ball-bearing rotation hardware. + Floor Track Mounting System (Optional Add-on): Add this for a secure floor-mount installation. Includes reinforced aluminum rails. Features & Comfort Integrated Leg Rest: Fold-out 12" × 17.5" footrest for stops or long drives. Integrated 3-point Belt: Retractable shoulder belt anchored to a reinforced steel frame. Materials: Breathable, flame-retardant automotive-style upholstery that's easy to clean. Technical Specs Dimensions: 35" L × 17" W × 32" H (sized for Sprinter, Transit, and ProMaster clearances). Weight: Seat unit (~95 lbs) | Hardware (35–50 lbs). Factor into your payload calculation. Frame: Powder-coated reinforced steel. Shipping & Lead Times Production: Built to order. Expect a 4–6 week lead time. Delivery: Ships via heavy freight on a pallet. Installation: Professional installation required to maintain warranty and ensure proper structural mounting.

The NovaLux Duo GT is a versatile double seat with seat-to-bed conversion for camper van builds. Designed by van builders for van builders, the Duo GT was built to solve the family-fit problem. Whether you need a passenger row or a 63-inch sleeping platform, it can slide, recline, and expand to fit your layout. The Story: Built for the Van Life Reality Most double seats are designed for motorhomes, leaving van builders with bulky benches that don't fit a modern floor plan. We spent years in the shop realizing that builders needed a seat that was actually versatile. We designed the Duo GT to solve the most common builder headaches: Adjustable Width: Unique to the Duo GT, the seat width adjusts by up to 6 inches to give you the right aisle clearance for your cabinetry. Seat-to-Bed Conversion: Reclining backrests transition into a flat 63-inch sleeping platform — a foundation for your bed system. Dual-Passenger Comfort: Dual adjustable footrests and ergonomic support for everyone in the back. The "GT" represents long-haul comfort. From breathable upholstery to the powder-coated steel frame, every detail was thought through by the team at Big Bear Vans. What's in the Box? (Build Your System) Every van layout is unique. We've made our mounting system modular so you only pay for the hardware your specific build needs. Note: Our hardware is engineered specifically for the NovaLux Duo GT and is not sold separately for other seat brands. Duo GT Double Seat (Core): Includes (1) double seat unit with integrated 3-point seat belts, reclining backrests, and dual adjustable leg rests. + 360° Swivel Base (Optional Add-on): Add this if you need the seat to rotate for a "living room" layout. Includes heavy-duty ball-bearing rotation hardware. + Floor Track Mounting System (Optional Add-on): Add this for a secure floor-mount installation. Includes reinforced aluminum rails. Features Seat-to-Bed Conversion: Reclining backrests convert into a flat 63-inch sleeping platform. Adjustable Ergonomics: Dual adjustable footrests and adjustable seat width up to 6". Integrated Belts: 3-point retractable shoulder belts with retractor mechanism. Material: Durable, breathable, flame-retardant automotive-style upholstery. Dimensions All measurements provided in both metric (mm) and imperial (inches). Refer to the dimension diagram in the product gallery. Upright / Seated Position Overall Height: 1080 mm / 42.5" Seat Width (per seat): 800 mm / 31.5" Bench Width (both seats together): 900 mm / 35.4" Seat Depth (incl. extended footrest): 800 mm / 31.5" — broken down as 200 mm leg rest + 400 mm cushion + 200 mm clearance Seat-to-Floor Height: 450 mm / 17.7" Bed / Reclined Position Total Bed Length: 1600 mm / 63" — 1000 mm / 39.4" seat section + 600 mm / 23.6" footrest extension Bed Surface Height from Floor: 550 mm / 21.7" Total Footprint with Footrest Deployed: 1430 mm / 56.3" — base 830 mm + footrest 600 mm Base Footprint Base Width: 930 mm / 36.6" Technical Specifications Construction: Reinforced steel frame with powder-coated finish. Belts: Integrated 3-point retractable shoulder belts. Total Weight: Seat unit: 185 lbs | Hardware: 35–50 lbs. Factor into your payload calculation. Production & Shipping Built-to-Order: Standard production lead time of 4–6 weeks. Shipping Method: Ships via heavy freight on a pallet. Installation: Professional installation required for proper structural mounting and to maintain warranty. Disclaimer: This is an aftermarket component not manufactured by Mercedes-Benz, Ford, or Ram. Vehicle names are for fitment reference only.

Power your off-grid journey with the VanTrix 12V 600Ah LiFePO4 Deep Cycle Battery. This industrial-grade energy storage solution is engineered for home energy storage, camper vans, solar arrays, RV electrical systems, electric vehicles, and high-demand off-grid applications. Featuring Grade A Lithium Iron Phosphate (LiFePO4) cells, it delivers 7.2kWh of total energy and an industry-leading 24,000+ cycle life the last battery you'll ever need to buy. Why Choose the VanTrix 600Ah? (The Ultimate Power Reserve) Tired of constantly watching your battery monitor? The VanTrix 600Ah is built for the serious off-gridder. This single unit replaces an entire bank of traditional batteries, giving you enough power to run air conditioners, induction cooktops, high-end workstations, and full home energy systems without breaking a sweat. And with over 24,000 cycles of proven life, it's not just a battery. It's a decade-plus investment in true energy independence. Grade A LiFePO4 Cells: Factory-direct Grade A cells deliver superior energy density, chemical stability, and zero memory effect. | Safer, longer-lasting than standard lithium Extraordinary Cycle Life: ≥24,000 cycles at 25°C; more than 6× the cycle life of standard LiFePO4 batteries on the market. | Designed for daily use over 10+ years Extreme Temperature Operation: Operates from -30°C to 60°C without any external heating system required. | Four-season reliability in any climate Massive 7.2kWh Storage: Enough capacity to run a 2000W–3000W inverter system and power a full off-grid lifestyle from a single unit. | Simplifies wiring and saves space Smart Built-in BMS: The integrated high-performance Battery Management System handles all cell balancing and protection automatically. | Maintenance-free, set-and-forget operation Customisation Available: OEM/ODM accepted. Discharge current, charging current, and configurations can be customised to order. | Factory-direct flexibility 5-Year Warranty: Backed by a full 5-year manufacturer warranty and free replacement parts with online technical support. | Buy with complete confidence If you want to stop hunting for shore power and start living truly off-grid, the VanTrix 600Ah is the most important and most durable investment you can make in your build. Power & Storage Performance The VanTrix 600Ah is a powerhouse designed to replace bulky lead-acid banks with a single, high-efficiency unit and outlast them by decades. Total Capacity: 600Ah | 7.2kWh (7200Wh) Total Energy Storage | Grade A LiFePO4 cell architecture Nominal Voltage: 12V | Operating Voltage Range: 10V – 14.6V Maximum Charging Voltage: 14.6V | Standard Charging Current: 150A (customisable) Maximum Continuous Discharge Current: 200A (customisable) | Supports large 2000W–3000W inverters Cycle Life: ≥24,000 Cycles @ 25±2°C | Industry-leading longevity for daily use Max Load Quantity: 2400 cells | High-density modular cell architecture Self-Discharge Rate: Minimal, maintains charge during long-term seasonal storage | Less than 3% monthly loss All-Season Operation & Protection Features Built for four-season performance across the harshest environments, this battery requires no external heating system, it natively handles extreme cold and heat. Operating Temperature Range: -30°C to 60°C (-22°F to 140°F) | One of the widest ranges available in a 12V LiFePO4 battery No Self-Heating Required: Native cold-weather operation down to -30°C means no additional heating pads or circuits needed. | Reduced system complexity and cost Smart Built-in BMS: Integrated Battery Management System protects against overcharge, over-discharge, excessive heat, short circuits, and over-current. | 24/7 cell-level protection Automatic Cell Balancing: BMS continuously balances all cells to ensure uniform charge distribution and maximum capacity utilisation. | Extends cycle life significantly Over-Discharge Protection: Automatically prevents the battery from reaching dangerous voltage levels. | Preserves long-term battery health Short Circuit Protection: Instantaneous BMS response prevents damage from accidental short circuits. | Safe for all installation environments Technical Specifications Battery Type: LiFePO4; Lithium Iron Phosphate | Cathode Material: LiFePO4 | Safest and most stable lithium chemistry Model Number: 12V 600Ah Nominal Voltage: 12V Rated Capacity: 600Ah | 7.2kWh Operating Voltage Range: 10V – 14.6V Maximum Charging Voltage: 14.6V Standard Charging Current: 150A (customisable) Maximum Continuous Discharge Current: 200A (customisable) Cycle Life: ≥24,000 cycles @ 25±2°C Operating Temperature: -30°C to 60°C Dimensions (L × W × H): 450 × 330 × 230 mm / 17.7" × 13.0" × 9.1" Package Size: 15.75" × 20.50" × 12.25" (400 × 521 × 311 mm) Weight: ≤59 kg / ≤130 lbs | Gross Weight: 61 kg Protection: Built-in Smart BMS Warranty: 5 Years OEM / ODM: Accepted custom capacity, current, and configurations available Compliance: CE, RoHS, UN38.3 certified | Internationally recognised safety standards Compatible Applications The VanTrix 600Ah is a versatile deep-cycle battery designed for a wide range of high-demand power applications: Home Energy Storage Systems Primary application; ideal as a 12V 600Ah residential solar storage unit Electric Power Systems & Solar Arrays Pairs with solar panels and MPPT controllers for complete off-grid energy independence RVs, Camper Vans, Caravans & Trailers Replace your entire lead-acid bank with one powerful unit Electric Vehicles & Golf CartsHigh-cycle, high-discharge performance for EV drivetrains Electric Bicycles & Scooters Lightweight and long-lasting for personal electric transport Electric Forklifts & Industrial Equipment Handles continuous high-current discharge for industrial applications Wind & Solar Hybrid Off-Grid Systems Supports multi-source charging for reliable 24/7 power UPS & Emergency Backup Power Keeps critical systems running during power outages Charging Methods The VanTrix 600Ah supports multiple flexible charging options. Always ensure your charger or controller is set to a LiFePO4 profile at 14.6V. LiFePO4 Dedicated Charger: Set to 14.6V | Recommended standard charging current: 150A | Most efficient method for fast, full charges Solar Panel + MPPT Controller: Set MPPT to LiFePO4 profile at 14.6V | Ideal for off-grid solar home systems and van builds DC-DC (B2B) Charger: Use a high-amperage DC-DC charger for vehicle alternator charging | Protects your alternator from overload Generator (via AC-DC Charger): Use a LiFePO4-compatible AC charger for generator top-ups | Great for backup and hybrid charging setups ⚠️ Important: Do NOT use AGM, Gel, or standard lead-acid charging profiles. Always set your charger or solar controller to a dedicated LiFePO4 profile (14.6V max) for safe operation and maximum cycle life. Lead Time & Delivery 1–5 units: 10 business days 6–50 units: 15 business days 51–100 units: 30 business days 100+ units: To be negotiated directly with supplier Sold as single units. Package dimensions: 49 × 40 × 32 cm | Gross weight per unit: 61 kg What's Included & Installation Notes 1 × VanTrix 12V 600Ah LiFePO4 Deep Cycle Battery (XBC / Chengdu Tianbochuang) 1 × Set of Terminal Hardware | Heavy-duty connection hardware ✅ Free replacement parts included ✅ Online technical support provided Installation Note: Please verify that your solar controller, DC-DC charger, and AC-DC charger are configured with a LiFePO4 profile at 14.6V before installation. Using incorrect charging profiles will reduce performance and void warranty. | Essential for maximum cycle life and safety Customisation Note: OEM/ODM is accepted. If you require a custom discharge current (above 200A), custom charging current (above 150A), or custom battery configuration, please contact us directly before ordering. *Professional installation is strongly recommended for high-current electrical systems. This battery is not suitable for use as a starter/cranking battery.

Optimize your visibility and driving confidence with the Glacier View Passenger Solid Window. Specifically engineered for Mercedes-Benz Sprinter conversions (2007–Present), this fixed glass panel replaces metal door panels with premium, high-clarity safety glass. Designed to match the precise contours of the Sprinter passenger sliding door, it ensures a sophisticated, factory-quality finish. Why Builders Value This Window (Visibility and Style Integrated) A quality conversion should feel bright and open. The Glacier View window is a premier upgrade for your Sprinter, instantly transforming your driving experience by providing expansive passenger-side visibility. It is the perfect integration of essential environmental awareness and high-end aesthetics. Expansive Side-View Clarity: This window provides an open field of view, allowing you to navigate urban streets and tight maneuvers with complete confidence. OEM Factory Aesthetic: Features a premium 15% solar privacy tint and a designer black border created to match original factory glass for a seamless look. Superior Thermal Regulation: Expertly reflects solar heat and blocks 99% of UV rays to maintain a refreshing and cool cabin environment. Engineered for Strength: Crafted from high-durability tempered safety glass built for long-term security. Invite natural light into your build and enjoy a full field of view with the Glacier View series. Specifications Glass Type: Toughened Automotive Safety Glass. | High-strength construction for maximum security. Tint Level: 15% Solar Privacy Tint. | Matches professional OEM appearance while providing excellent interior-to-exterior visibility. UV Protection: Blocks up to 99% harmful UV rays. | Protects interior materials and reduces sun damage. Visible Light Transmission (VLT): Approx. 15% light transmission. | Optimal balance of privacy and visibility. Glass Thickness: 4mm – 5mm. | Automotive-grade tempered safety glass. Dimensions: Approx. 54.5" (L) × 30.3" (H). | Precision-cut for the Sprinter sliding door stamping. Product Weight: 22.7 lbs. | Optimized for vehicle door performance. Cutout Requirement: Uses factory OEM stamping lines. | No external template required. Window Style: Fixed (Solid). | Engineered for a permanent weatherproof seal and a quiet, rattle-free ride. Installation: Urethane Bonded. | Direct-to-metal flush fit ensures an aerodynamic profile and reduced wind noise. Mounting Position: Passenger Side Sliding Door. | Precision CNC-contoured for an exact match to door stampings. Advanced Features & Design The integrated black designer border elegantly conceals all structural adhesives and edges, providing the clean finish found in elite custom builds. Optimized Road Awareness: Provides a clear, unobstructed view of cyclists, pedestrians, and surrounding traffic. Solar Climate Management: Maintains a temperate interior by reflecting heat and protecting your cabin materials from 99% of UV rays. Structural Integrity: Manufactured to premium automotive impact standards and tested for long-term stability during travel. Serene Cabin Environment: Significant reduction in external road noise compared to standard metal panels, creating a peaceful interior. Precision Engineering: Contoured to integrate seamlessly with Sprinter body lines for a factory-fresh aesthetic. Vehicle Compatibility This window is specifically engineered for the passenger side sliding door: Fits: Mercedes-Benz Sprinter (2007–Present). Compatible with NCV3 and VS30 platforms. Wheelbase Compatibility: 144", 170", and 170" Extended models. Roof Types: Compatible with High Roof and Standard Roof variants. Position: Specifically designed for the passenger-side sliding door panel. *Pro Tip: Confirm your interior layout and sliding door configuration to ensure a perfect fit for your specific build. What's Included & Safe Shipping 1 × Glacier View Passenger Door Solid Window. Premium Shipping: Every order is shipped in a specialized, heavy-duty reinforced crate to ensure your glass arrives in pristine condition. (Shipping Crate Dimensions: ~59" x 34" x 4"). What's Not Included: Adhesive (Urethane) not included. Primer not included. Edge trim / gasket not included. Installation Success Tips: Required Adhesive: For a permanent, weatherproof structural bond, use high-quality Automotive-Grade Urethane Adhesive (such as Sikaflex 221). Required Tools: Professional caulking gun (12:1 thrust ratio recommended), primer applicator, cutting tools for panel prep. Installation Time: Approx. 3–6 hours curing before driving. Full cure recommended before washing vehicle. Installation Level: Intermediate to Professional. Prior experience recommended. Professional Finish: We recommend installation by an experienced builder or professional glass shop to achieve the most precise alignment and seal. Finishing Touch: Consider adding interior edge trim to provide a soft, professional look to the metal edges inside your cabin. Why Choose Van Parts Outlet? We are van builders who value quality and precision. Our mission is to ensure your build process is smooth and your adventures are worry-free by providing only the most reliable, builder-tested gear. Expert-Vetted Gear: Every product is selected for its proven durability against road vibration and temperature changes. Technical Support: Our team of experienced builders is available to help you with your installation questions. Precision Data: We provide exact measurements and compatibility guides so you can achieve a perfect fit the first time.

Transform your long-wheelbase build with the Glacier View 170 Mid Passenger Side Window. Specifically designed for the 170" wheelbase Mercedes Sprinter (2007–Present), this fixed glass panel is the premier way to invite natural light into your cabin. It provides a sophisticated, OEM-style look while maintaining the curated privacy and thermal comfort your high-end camper conversion deserves. Transform Your 170" Interior (Panoramic Light & Atmosphere) The middle panel of a 170" Sprinter is a prime opportunity to enhance your van's living space. The Glacier View Mid-Panel window instantly elevates the vibe of your build, bringing in expansive natural light while perfectly preserving the privacy of your lounge or sleeping area. It's the professional choice to make your large-format van feel like a custom luxury home. Expansive Interior Feel: Adding glass to the mid-section opens up your cabin, making the longest Sprinter models feel bright, airy, and inviting. Curated Privacy: Our deep solar tint is integrated directly into the toughened safety glass, providing you with a clear view of the landscape while keeping your interior secluded from the outside world. Seamless Factory Aesthetic: Precision CNC-cut edges and a black designer border elegantly conceal all installation lines, giving you a flush-fit look that perfectly matches original equipment. Four-Season Comfort: Toughened safety glass provides superior thermal and acoustic properties compared to metal panels, ensuring your van remains quiet and easy to keep at your preferred temperature. Aerodynamic & Quiet Ride: Flush-mounted design reduces wind drag and eliminates whistling noise at highway speeds. Off-Road Ready Strength: Engineered to withstand vibration, flex, and harsh travel conditions. Specifications Vehicle Fitment: 170″ Wheelbase Mercedes Sprinter (2007–Present). Compatible with NCV3 and VS30 platforms. Glass Type: Toughened Automotive Safety Glass. Tint Level: 15% Solar Privacy Tint. | Blocks up to 99% of harmful UV rays while maintaining clear interior visibility. Dimensions: Approx. 1378 mm × 711 mm (54.25" x 28"). Window Style: Fixed / Solid. Engineered for maximum insulation and a perfect, weatherproof seal. Installation Type: Urethane Bonded. | Direct-to-metal installation for structural strength and leak-proof performance. Edge Finish: CNC Precision Cut with a Black Designer Border to mask all structural bond lines. Mounting Position: Passenger Side Mid-Wall Panel. Roof Compatibility: Fits both High Roof and Standard Roof Sprinter models.   Advanced Features & Design Enhance your van's interior comfort and aesthetic with a window designed for long-term durability and style. OEM Styling: The black ceramic border creates a professional automotive finish, elegantly hiding the adhesive for a factory-clean look. Natural Climate Management: The deep tint protects your interior from 99% of UV rays while offering better thermal insulation than a standard metal wall. Precision Fit: CNC-contoured edges ensure a seamless integration with your Sprinter's specific body lines and mid-wall stampings. Structural Durability: Built to provide a quiet, stable interior environment even during high-speed travel and off-grid exploration. OEM Stamp Compatible: Designed to align with factory body stampings for accurate and clean installation. Impact Resistance: Strong tempered glass provides enhanced durability compared to standard household glass. Vehicle Compatibility This window is vehicle-specific and panel-specific to ensure a perfect match: Vehicle: 170″ Wheelbase Mercedes Sprinter (2007–Present). Specifically contoured for the long-wheelbase chassis. Positioning: Designed for the Passenger Side Mid-Wall Panel (positioned between the sliding door and the rear wheel well). Layout Note: This panel is designed specifically for the fixed passenger mid-wall. *Pro Tip: Confirm your interior layout and wheelbase to ensure this beautiful panoramic panel perfectly complements your kitchen or seating design. What's Included & Safe Shipping 1 × Glacier View 170" Mid Passenger Side Solid Window. Premium Shipping: Ships in a specialized, heavy-duty reinforced crate to ensure your glass arrives in pristine condition. Installation Success Tips: Required Adhesive: For a permanent, weatherproof structural bond, use high-quality Automotive-Grade Urethane Adhesive (such as Sikaflex 221). Hardware Note: Adhesive, primer, and trim are not included and must be purchased separately. Professional Finish: We recommend installation by an experienced builder or professional glass shop to achieve the most precise alignment and seal. Edge Finishing: Consider adding interior edge trim to provide a soft, professional finish to the metal edges inside your cabin. Why Choose Van Parts Outlet? We are van builders who value quality and precision. Our mission is to ensure your build process is smooth and your adventures are worry-free by providing only the most reliable, builder-tested gear. Expert-Vetted Gear: Every product is selected for its proven durability against road vibration and temperature changes. Technical Support: Our team of experienced builders is available to help you with your installation questions. Precision Data: We provide exact measurements and compatibility guides so you can achieve a perfect fit the first time.

Elevate your Sprinter's mid-section with the Glacier View 170 Mid Driver-Side Window. Specifically engineered for the 170" wheelbase Mercedes Sprinter (2007–Present), this fixed, flush-mounted glass panel provides a seamless, high-end look. It is the premier solution for inviting natural light into your galley kitchen, seating areas, or lounge zones. Transform Your Interior (The Builder's Choice for Light) The 170" Sprinter offers an incredible amount of space, and the right window transforms that space into a bright, inviting sanctuary. The Glacier View Driver-Side Mid Window is the professional choice to open up your interior. Whether you're preparing a meal at your galley or relaxing in your mid-row seating, this window instantly enhances the atmosphere of your mobile home. Galley-View Perfection: Most high-end builds place the kitchen along this driver-side wall. This window allows you to enjoy the landscape while you cook and brings in beautiful natural light for your prep work. Exclusive Privacy: With a premium 15% solar tint, you enjoy an expansive view of the outdoors while maintaining a private, exclusive interior environment. It's the ultimate sleek upgrade for both urban and off-grid adventures. Consistent Cabin Comfort: Our bonded safety glass provides a superior seal and excellent acoustic insulation. Enjoy a quiet, peaceful ride and a stable, comfortable cabin temperature in any season. Factory-Quality Finish: The precision-engineered black designer border elegantly masks all installation adhesives, ensuring your van has the sophisticated look of a custom luxury build. Enhanced Driving Safety: Improves side visibility along the driver-side mid section, reducing blind spots during lane changes and parking. Thermal UV Protection: Blocks up to 99% of harmful UV rays to protect interior materials from fading and heat buildup. Specifications Vehicle Fitment: Mercedes-Benz Sprinter 170" Wheelbase (2007–Present). Compatible with NCV3 and VS30 platforms. Glass Type: Toughened Automotive Safety Glass. Tint Level: 15% Solar Privacy Tint. Provides professional-grade UV protection and maintains a cool interior. Dimensions: Approx. 1397 × 768 mm (55" × 30.25"). Precision-cut for a perfect fit in Sprinter mid-panel stampings. Installation Type: Urethane Bonded Structural Fitment. Requires cutting OEM stamped panel for installation. Position: Mid Section – Driver Side (Fixed wall panel behind the driver). Roof Compatibility: Fits both High Roof and Standard Roof 170" Sprinter models. Warranty: 1-Year Manufacturer Warranty against manufacturing defects. Advanced Features & Design The Glacier View 170 Mid-Side Window is a solid, non-opening panel designed for maximum durability and thermal efficiency. Aerodynamic Flush-Mount: The low-profile exterior maintains the sleek, modern lines of your Sprinter while ensuring a quiet ride. Pristine Visibility: Permanent solar tint technology protects your interior from 99% of harmful UV rays while allowing for crisp, clear views. High-Impact Strength: Automotive-grade tempered glass is built for longevity, standing up to the rigors of the open road and off-road exploration. Peaceful Environment: The bonded installation adds structural rigidity to your van and creates a more quiet and serene driving experience. Designer Black Frit: A ceramic black border elegantly conceals the structural bond for a professional, factory-clean aesthetic. OEM Stamp Alignment: Designed to match factory Sprinter body stampings for accurate and clean installation. Wind Noise Reduction: Flush-fit design reduces aerodynamic drag and eliminates whistling at highway speeds. Vehicle Compatibility This window is specifically contoured for the driver-side mid-panel of the 170" wheelbase model: Compatibility: Mercedes Sprinter 170" (2007–Present). Fits all high-roof and standard-roof 170 models. Positioning: Designed specifically for the fixed driver-side wall panel. Not intended for use on sliding doors. Cut Requirement: Requires cutting OEM stamped metal panel for installation (bond-in glass system). *Pro Tip: Confirm your interior cabinetry layout to ensure this large panoramic window perfectly complements your kitchen or lounge design. What's Included & Safe Shipping 1 × Glacier View 170 Mid Driver-Side Solid Window. Premium Shipping: Ships in specialized, heavy-duty reinforced packaging to ensure your window arrives in pristine condition. Not Included: Adhesive, primer, edge trim, and installation tools are not included and must be purchased separately. Installation Success Tips: Required Adhesive: For a permanent, weatherproof bond, use high-quality Automotive-Grade Urethane (such as Sikaflex 221 or 3M Window Weld). Cure Time: Allow 3–6 hours before driving and 24 hours for full structural bond strength. Professional Finish: We recommend installation by an experienced builder or professional glass shop to achieve a perfectly aligned, factory finish. Edge Trimming: Consider adding interior edge trim to provide a soft, finished look to the metal edges inside your cabin. Why Choose Van Parts Outlet? We are van builders who value quality and precision. Our mission is to ensure your build process is smooth and your adventures are worry-free by providing only the most reliable, builder-tested gear. Expert-Vetted Gear: Every product is selected for its proven durability against road vibration and temperature changes. Technical Support: Our team of experienced builders is available to help you with your installation questions. Precision Data: We provide exact measurements and compatibility guides so you can achieve a perfect fit the first time.

Maximize your interior comfort and style with the Glacier View Sprinter Flush Sliding Window. Specifically engineered for the passenger-side rear quarter panel of Mercedes-Benz Sprinter vans (2007–Present), this premium window combines a sophisticated, flush-fit exterior with a high-performance sliding vent for excellent cross-ventilation. Why Builders Value These Flush Sliding Windows (Style & Fresh Air) In a van build, refreshing airflow is a priority and with Glacier View, you get it without compromising your van's clean, professional lines. This window is the premier choice for owners who want the functionality of a massive breeze combined with the sophisticated appearance of a factory-installed window. It's an essential upgrade for maintaining a light, airy environment while you relax or cook. Refreshing Cross-Breeze: The oversized 17.5" sliding vent allows for massive airflow, working perfectly in harmony with a roof fan to pull fresh air through your cabin. | Optimized for a cool, comfortable interior. Pristine Nature Access: Enjoy the outdoors while keeping your living space clear and comfortable. The integrated high-density mesh screen allows for total ventilation while ensuring your interior remains a peaceful sanctuary. | Durable and easy-to-clean screen material. Seamless Privacy: When closed, the flush-fit design blends perfectly with your van's body for a sleek, dealership-quality look. The easy-to-use internal locking latch ensures your environment remains private and secure. | Secure locking for total peace of mind. Factory-Quality Finish: Featuring a signature black designer border and deep 20% privacy tint, this window enhances the Sprinter's lines while providing superior protection for your interior materials. | Perfectly matches factory aesthetics. Specifications Vehicle Fitment: Mercedes-Benz Sprinter (2007–Present). Compatible with 144", 170", and 170" Extended models. Mounting Position: Passenger Side Rear Quarter Panel (Not for sliding doors). Safety Standards: Made from high-strength Tempered Automotive Safety Glass. Tint Level: 20% Dark Privacy Tint. Provides professional-grade UV protection (~99%) and maintains a temperate cabin in the sun. Dimensions: 1626 mm × 705mm x 38 mm (Approx. 64" x 27.75" x 1.50"). Precision-contoured for rear panel geometry. Vent Opening: High-volume sliding panel (Approx. 445 mm × 333 mm / 17.5" × 13.1") for maximum fresh air exchange. Weight: approx. 27 lbs Window Type: Flush-Fit Sliding (Half-Slider Vent). Rear-opening design for optimized airflow. Bug Protection: Integrated high-density mesh screen (pre-installed) for insect-free ventilation. Security: Internal locking latch system for safe and secure operation. Weather Sealing: Automotive-grade weatherproof sealing system engineered to prevent leaks and moisture entry. Advanced Features & Design The Glacier View Flush Sliding Window offers a sophisticated finish with the added benefit of controlled airflow and long-term durability. Integrated Mesh Screen: The built-in screen keeps your interior space clear while welcoming in refreshing air. | Essential for comfortable forest and lakeside camping. Internal Safety Lock: Features a secure internal latch that is easy to operate, ensuring a stable and secure cabin environment. Aerodynamic Profile: The flush-mount design ensures a whisper-quiet ride and maintains the sleek, modern aesthetic of your van. Designer Black Frit: A ceramic black border elegantly hides the structural adhesive and metal edges for a professional, factory-clean look. Weatherproof Engineering: Automotive-grade seals are engineered to maintain a perfect, watertight environment in any weather condition. Quiet Ride Performance: Flush-mounted design reduces wind noise and vibration compared to traditional gasket-style windows. Fitment & Compatibility This window is specifically engineered for the Passenger Side Rear Quarter Panel: Vehicle: Mercedes-Benz Sprinter (2007–Present). Fits NCV3 and VS30 platforms. Wheelbases: Compatible with 144", 170", and 170" Extended models. Position: Designed for fixed rear-side body panels only (not compatible with sliding doors). *Pro Tip: Verify your interior layout (bed, cabinets, or storage) before cutting to ensure proper clearance. What's Included & Safe Shipping 1 × Glacier View Flush Sliding Window – Passenger Rear Side. 1 × Integrated Fresh-Air Mesh Screen (Pre-installed). Premium Shipping: Every order is shipped in a specialized, heavy-duty reinforced crate to ensure your glass arrives in pristine condition. (Shipping Crate Dimensions: ~59" x 34" x 4"). Note: Adhesive, primer, and edge trim are not included and must be purchased separately. Installation Success Tips: Required Adhesive: For a permanent, weatherproof bond, these windows must be installed using high-quality Automotive-Grade Urethane Adhesive (such as Sikaflex 221 or 3M Window Weld). Professional Alignment: We highly recommend installation by an experienced builder or professional glass shop to achieve a perfectly aligned, factory finish. Finishing Touch: Consider adding interior edge trim to provide a soft, professional look to the metal edges inside your cabin. Installation Requirement: Requires cutting the vehicle's metal panel. This is a permanent structural modification and must be done carefully. Why Choose Van Parts Outlet? We are van builders who value quality and precision. Our mission is to ensure your build process is smooth and your adventures are worry-free by providing only the most reliable, builder-tested gear. Expert-Vetted Gear: Every product is selected for its proven durability against road vibration and temperature changes. Technical Support: Our team of experienced builders is available to help you with your installation questions. Precision Data: We provide exact measurements and compatibility guides so you can achieve a perfect fit the first time.

Enhance your van's rear living area with the Glacier View Flush Sliding Window: Rear Driver Side. Precision engineered for the rear quarter panel of Mercedes-Benz Sprinter vans (2009–2025), this window combines a sophisticated, factory style flush exterior with a high flow sliding vent. It provides refreshing ventilation for rear bedding or galley areas while maintaining a modern, professional appearance. Why Builders Value These Rear Sliding Windows (Comfort & Style) The rear quarter panel is the heart of your van's sleeping area. The Glacier View Rear Sliding Window is designed to bring high-volume, fresh airflow directly to your bedside. It's the perfect blend of a professional factory look and the rugged functionality needed for relaxing off-grid adventures. Refreshing Sleep: Experience the cooling power of cross-flow ventilation. When paired with a roof fan, this sliding vent helps pull fresh, cool air right across your bed for a restful night's sleep. Clear Airflow: Enjoy nature while keeping your interior clear. The built-in high-density mesh screen allows you to keep the window open through the night to welcome in the breeze while maintaining a clear interior environment. Refined Privacy: The deep 20% solar tint provides a beautiful view of your surroundings while ensuring your living space and valuables remain private and secure. Seamless Exterior: Our flush-fit glass and designer black border ensure a professional finish that looks like it came straight from the dealership, maintaining a clean and aerodynamic profile. Specifications Vehicle Fitment: Mercedes-Benz Sprinter (2007–Present). Fits 144", 170", and 170" Extended wheelbases. Material: High-strength Tempered Automotive Safety Glass. Glass Thickness: Approx. 4–5 mm automotive tempered glass. Tint Level: 20% Dark Privacy Tint. Blocks 99% of UV rays to protect your interior and keep the cabin cool. Dimensions: 1406 mm × 769 mm (Approx. 55.3" × 30.3"). Precision-contoured for the driver-side rear panel. Vent Opening: Oversized 17.5" sliding panel for maximum fresh air exchange. Approx. Weight: ~30 lbs. (Heavy-duty glass and slider frame construction). Advanced Features & Design The Glacier View Rear Driver-Side Sliding Window offers a seamless integration into your Sprinter's body lines with a focus on long-term durability. Integrated Mesh Screen: Allows for continuous fresh air while keeping your interior space clear and comfortable. Security First: Includes an easy-to-use internal safety lock to ensure your van remains a secure environment while you sleep or explore. Climate Management: High-performance tint technology significantly maintains a cool interior in your sleeping quarters even in direct sun. Quiet Ride: High-strength safety glass and a flush-mount design help maintain a quiet and stable interior environment at highway speeds. Black Designer Frit: A ceramic black border elegantly hides all metal edges and adhesive for a factory-clean finish. Thermal & Acoustic Performance: Reduces external road noise and improves cabin insulation compared to metal panels. Fitment & Compatibility This window is specifically engineered for the Rear Quarter Panel (Driver Side): Vehicle: Mercedes-Benz Sprinter (2007–Present). Compatible with NCV3 and VS30 platforms. Wheelbases: Fits all high-roof models (144", 170", and 170" EXT). Placement: Designed specifically for the panel behind the driver, typically where rear bedding is located. Important: Not compatible with sliding door or mid-body panels. *Pro Tip: Always verify your interior cabinet layout and panel configuration to ensure a perfect fit for your specific build. What's Included & Safe Shipping 1 × Glacier View Flush Sliding Window – Rear Driver Side. 1 × Integrated Fresh-Air Mesh Screen (Pre-installed). Secure Delivery: Ships in a specialized, heavy-duty reinforced crate with internal foam protection to prevent breakage during transit. (Shipping Box: ~59" x 34" x 4"). Installation Success Tips: Required Adhesive: Automotive-Grade Urethane Adhesive (Sikaflex 221 / 3M Window Weld). Cut-Out Size Reference: OEM-style Sprinter rear quarter cut-out range approx. 1290 mm × 760 mm (varies slightly by model year). Installation Tools: Oscillating saw, primer, urethane gun (12:1 ratio minimum), trim edge molding recommended. Cure Time: Safe drive after 3–6 hours. Full cure 24–72 hours before washing or heavy exposure. Professional Finish: Recommended installation by experienced van builder or auto glass technician. Why Choose Van Parts Outlet? We are van builders who value quality and precision. Our mission is to ensure your build process is smooth and your adventures are worry-free by providing only the most reliable, builder-tested gear. Expert-Vetted Gear: Every product is selected for its proven durability against road vibration and temperature changes. Technical Support: Our team of experienced builders is available to help you with your installation questions. Precision Data: We provide exact measurements and compatibility guides so you can achieve a perfect fit the first time.

A real shower for your van — built by people who actually build vans. We've spent the last several years building custom van conversions. After installing every shower stall on the market — and dealing with the cracks, leaks, and rust that come with most of them — we started spec'ing our own. The Vankea 32" Aluminum Shower is what we now put in our own builds. It's the size most full-size van layouts ask for: roomy enough to stand and turn in, small enough to leave space for the rest of your build. Why we put this in our own builds Most van showers fail in the same places. Fiberglass cracks from road vibration. Plastic stalls warp. Sealant lines split after a season of travel. We got tired of warrantying other people's products, so we built one we trust. Aluminum panels, not fiberglass. Won't crack from vibration. Won't rust. Powder-coated finish. Easy to wipe clean. Doesn't grow mold the way porous surfaces do. Telescoping height. Adjusts to fit standard and high-roof builds — 72" minimum, extends to 78" (6'6") maximum. Rear plumbing cavity. Water lines hide inside the wall, so the finished bathroom looks clean — not like a DIY project. Flat-packs for shipping, bolts together with the included hardware. No custom fabrication. Light. 53 lbs vs. 150+ lbs for comparable fiberglass units. Your van's payload thanks you. Key Specifications Width: 32" (820mm) Depth: 26¼" at base, tapering to 24½" mid-height, 20" at top — width stays consistent front to back Height: 72" minimum, 78" (6'6") maximum — telescoping, adjusts for standard and high-roof layouts Weight: 53 lbs Shower pan: 32½" × 25¾" × 5¼" deep Entry opening: 23½" wide × 68" tall Drain: Pre-cut for standard 2" RV/marine drains Material: Full-body powder-coated aluminum Door opening: Front-facing, works with roller or retractable shower doors Plumbing: Integrated rear cavity for hidden water-line routing Design: Engineered in the USA, manufactured overseas to our specifications Will this fit my van? Designed for high-roof full-size cargo vans: Mercedes Sprinter — 144 / 170 / EXT high-roof models Ford Transit — high-roof models Ram ProMaster — high-roof models (fits flush against ProMaster's flat walls) Before you buy, check that your van has: Floor-to-ceiling clearance of at least 73 inches (room for the 72" minimum height plus mounting and the 5¼" pan) Available wall width of at least 33 inches Wall depth clearance of at least 27 inches (for the rear plumbing cavity) Entry doorway clear of 23½" × 68" for the shower opening Not sure if it fits? Send us a message before you order. The same team that builds the vans answers the emails — we'll help you confirm it works for your layout. *Aftermarket component not affiliated with Mercedes-Benz, Ford, or Ram. What's in the box Aluminum enclosure panels (interlocking, telescoping body) Integrated shower pan with pre-cut 2" drain hole Front channel and trim Stainless steel mounting hardware Step-by-step assembly instructions Not included (so you can plan your build): Shower door Faucet, mixer, showerhead Drain hardware Sealant (use automotive-grade silicone or urethane) Water lines and fittings Installing it If you've done a van interior before, this is a 2-person, half-day job. If it's your first build, plan a full day and have a friend help with panel alignment. Ships flat-packed — inspect for freight damage before signing for delivery Pre-drilled mounting points for faster installation Professional plumbing installation recommended for water-line connections Compatible with roof vents and bathroom fans for moisture control Use automotive-grade silicone or urethane sealant for a watertight finish Shipping & Delivery Shipping method: Freight shipping or local pickup depending on location Packaging: Ships flat-packed in reinforced protective packaging On delivery: Inspect for freight damage before signing — report any issues to us within 24 hours Maintenance & care Wipe down after each use to keep the powder coating fresh. Use: Mild soap, dish soap, or Simple Green Avoid: Bleach, abrasive scrubbers, citrus-based cleaners — these will dull the finish over time Regular wipe-down prevents soap scum and extends the life of the finish Who this is for Full-size cargo van builds (Sprinter, Transit, ProMaster high-roof) Full-time van life and extended off-grid travel Builders who want a wet bath that looks finished, not improvised Anyone replacing a cracked or leaking fiberglass stall About us — why trust this product? We're a working van conversion shop. We've built and supplied parts for dozens of custom van builds, and we still build vans today. Every product we sell is something we either use ourselves or install for our customers. If we wouldn't put it in our own van, we don't sell it. Questions about fitment, installation, or what to pair this with? Reach us directly — the same team that builds the vans answers the emails.

The compact shower we put in tight van builds. After years of installing every shower stall on the market — and warrantying too many cracks, leaks, and rust spots — we started spec'ing our own. The Vankea XS is the smallest size in our lineup. If you're working with a tight 144" Sprinter, a short ProMaster, or any layout where every wall inch matters, this is the one that gets you a real wet bath without taking over the whole van. Why we put this in our own builds Most van showers fail in the same places. Fiberglass cracks from road vibration. Plastic stalls warp. Sealant lines split after a season of travel. We got tired of warrantying other people's products, so we built one we trust. Aluminum panels, not fiberglass. Won't crack from vibration. Won't rust. Powder-coated finish. Easy to wipe clean. Doesn't grow mold the way porous surfaces do. Telescoping height. Adjusts to fit standard and high-roof builds — 72" minimum, extends to 78" (6'6") maximum. Rear plumbing cavity. Water lines hide inside the wall, so the finished bathroom looks clean — not like a DIY project. Flat-packs for shipping, bolts together with the included hardware. No custom fabrication. Light. 53 lbs vs. 150+ lbs for comparable fiberglass units. Your van's payload thanks you. Key Specifications Width: 25" (620mm — marketed as XS in our shower lineup) Depth: 26¼" at base, tapering to 24½" mid-height, 20" at top — width stays consistent front to back Height: 72" minimum, 78" (6'6") maximum — telescoping, adjusts for standard and high-roof layouts Weight: 53 lbs Shower pan: 25½" × 27" × 5¼" tall Entry opening: 19" wide × 68" tall Drain: Pre-cut for standard 2" RV/marine drains Material: Full-body powder-coated aluminum Door opening: Front-facing, works with roller or retractable shower doors Plumbing: Integrated rear cavity for hidden water-line routing Design: Engineered in the USA, manufactured overseas to our specifications Will this fit my van? Designed for high-roof full-size cargo vans where wall space is limited: Mercedes Sprinter — 144 high-roof especially (the smallest footprint we make, ideal for tight layouts) Ford Transit — high-roof models Ram ProMaster — high-roof models, including shorter wheelbases (fits flush against ProMaster's flat walls) Before you buy, check that your van has: Floor-to-ceiling clearance of at least 73 inches (room for the 72" minimum height plus mounting and the 5¼" pan) Available wall width of at least 27 inches Wall depth clearance of at least 27 inches (for the rear plumbing cavity) Entry doorway clear of 19" × 68" for the shower opening Note on the entry: The 19" opening is narrower than our larger sizes. Comfortable for daily use, but worth measuring against your own shoulders if you're a larger build. Not sure if it fits? Send us a message before you order. The same team that builds the vans answers the emails — we'll help you confirm it works for your layout. *Aftermarket component not affiliated with Mercedes-Benz, Ford, or Ram. What's in the box Aluminum enclosure panels (interlocking, telescoping body) Integrated shower pan with pre-cut 2" drain hole Front channel and trim Stainless steel mounting hardware Step-by-step assembly instructions Not included (so you can plan your build): Shower door Faucet, mixer, showerhead Drain hardware Sealant (use automotive-grade silicone or urethane) Water lines and fittings Installing it If you've done a van interior before, this is a 2-person, half-day job. If it's your first build, plan a full day and have a friend help with panel alignment. Ships flat-packed — inspect for freight damage before signing for delivery Pre-drilled mounting points for faster installation Professional plumbing installation recommended for water-line connections Compatible with roof vents and bathroom fans for moisture control Use automotive-grade silicone or urethane sealant for a watertight finish Shipping & Delivery Shipping method: Freight shipping or local pickup depending on location Packaging: Ships flat-packed in reinforced protective packaging On delivery: Inspect for freight damage before signing — report any issues to us within 24 hours Maintenance & care Wipe down after each use to keep the powder coating fresh. Use: Mild soap, dish soap, or Simple Green Avoid: Bleach, abrasive scrubbers, citrus-based cleaners — these will dull the finish over time Regular wipe-down prevents soap scum and extends the life of the finish Who this is for Builders working with the tightest wall space (144" Sprinter, shorter ProMaster, compact Transit layouts) Solo travelers and couples who prioritize layout space over shower size Anyone who wants a real wet bath instead of an outdoor shower or no shower at all Replacing a cracked or leaking fiberglass stall in a smaller build About us — why trust this product? We're a working van conversion shop. We've built and supplied parts for dozens of custom van builds, and we still build vans today. Every product we sell is something we either use ourselves or install for our customers. If we wouldn't put it in our own van, we don't sell it. Questions about fitment, installation, or what to pair this with? Reach us directly — the same team that builds the vans answers the emails.

NovaLux Duo RS 35" Convertible Swivel Seat-to-Bed System. A dual-captain's chair configuration that functions as passenger seating during the day and a flat sleeping platform at night. Designed for full-size cargo vans, it maximizes floor plan efficiency without giving up comfort. About the Duo RS The Duo RS is built around a wide individual captain's chair format. Each seat is 35 inches wide, which gives you real long-haul comfort instead of a cramped bench. Combining your passenger seating and your primary bed into a single modular system frees up floor space for a larger kitchen, gear storage, or a wider aisle. Long-haul ergonomics. High-density foam and synthetic leather, lumbar support, infinite recline. 180-degree swivel. Turns each seat to face the living area or the dashboard. Lockable in forward-facing position when in transit. Integrated 3-point belts. Each chair has 3-point belts anchored directly to the seat frame. Key Specifications Single Seat Size: 35.4" L × 31.5" W × 43.4" H Combined Bed Width: 70.8" flat sleeping surface Swivel Range: 180-degree rotation, lockable in forward position Belts: Integrated 3-point seat belts, frame-mounted Upholstery: Automotive-grade synthetic leather Frame: Reinforced steel Features & Design The Duo RS is built around a multi-functional layout for 144" or 170" wheelbase builds. Infinite Recline: Adjustable backrest supports upright seating, lounging, or sleeping. Ergonomic Support: High-density foam cushioning with lumbar support. Swivel Base: Heavy-duty rotation plate, lockable in forward-facing position for transit. Integrated Belts: Frame-mounted 3-point belts, no wall anchors needed. Low-Profile Footprint: Designed to leave room for galley kitchens or side storage. Vehicle Compatibility Designed for floor-mounted installation in: Mercedes Sprinter — NCV3 and VS30 platforms Ford Transit — high-roof and mid-roof Ram ProMaster — flat-floor builds Note: Verify floor structure and mounting points before installation. Requires secure structural anchoring. *Aftermarket component not affiliated with Mercedes-Benz, Ford, or Ram. Vehicle names are for fitment reference only. What's Included & Installation 2 × Captain's Chairs Seat-to-bed folding hardware Mounting hardware kit Installation Notes: Professional installation is strongly recommended for proper structural mounting. Check local regulations regarding passenger seating in your jurisdiction before installation.