NovaLux Duo RS 35" Convertible Swivel Seat-to-Bed System. A dual-captain's chair configuration that functions as passenger seating during the day and a flat sleeping platform at night. Designed for full-size cargo vans, it maximizes floor plan efficiency without giving up comfort. About the Duo RS The Duo RS is built around a wide individual captain's chair format. Each seat is 35 inches wide, which gives you real long-haul comfort instead of a cramped bench. Combining your passenger seating and your primary bed into a single modular system frees up floor space for a larger kitchen, gear storage, or a wider aisle. Long-haul ergonomics. High-density foam and synthetic leather, lumbar support, infinite recline. 180-degree swivel. Turns each seat to face the living area or the dashboard. Lockable in forward-facing position when in transit. Integrated 3-point belts. Each chair has 3-point belts anchored directly to the seat frame. Key Specifications Single Seat Size: 35.4" L × 31.5" W × 43.4" H Combined Bed Width: 70.8" flat sleeping surface Swivel Range: 180-degree rotation, lockable in forward position Belts: Integrated 3-point seat belts, frame-mounted Upholstery: Automotive-grade synthetic leather Frame: Reinforced steel Features & Design The Duo RS is built around a multi-functional layout for 144" or 170" wheelbase builds. Infinite Recline: Adjustable backrest supports upright seating, lounging, or sleeping. Ergonomic Support: High-density foam cushioning with lumbar support. Swivel Base: Heavy-duty rotation plate, lockable in forward-facing position for transit. Integrated Belts: Frame-mounted 3-point belts, no wall anchors needed. Low-Profile Footprint: Designed to leave room for galley kitchens or side storage. Vehicle Compatibility Designed for floor-mounted installation in: Mercedes Sprinter — NCV3 and VS30 platforms Ford Transit — high-roof and mid-roof Ram ProMaster — flat-floor builds Note: Verify floor structure and mounting points before installation. Requires secure structural anchoring. *Aftermarket component not affiliated with Mercedes-Benz, Ford, or Ram. Vehicle names are for fitment reference only. What's Included & Installation 2 × Captain's Chairs Seat-to-bed folding hardware Mounting hardware kit Installation Notes: Professional installation is strongly recommended for proper structural mounting. Check local regulations regarding passenger seating in your jurisdiction before installation.

Bear Power 2000W Pure Sine Wave Inverter/Charger – 12V DC to 110V AC The Bear Power 2000W 12V low-frequency pure sine wave inverter charger transforms DC power, stored by batteries, into AC electricity that can be used to run your tools and appliances at home, in an RV, or in a commercial vehicle. It combines a pure sine wave inverter, an automatic battery charger, and an AC auto-transfer switch in a single marine and industrial grade unit. The built-in AC-to-DC battery converter charger lets you recharge your battery bank from an AC source such as a fuel-powered generator, shore power, or a regular outlet at home. The charger features a seven-type battery selector and 4-stage charging for safely and effectively charging your battery source. Use this product for renewable solar, off-grid, mobile, and emergency backup power applications anywhere that uses 110V or 120V of alternating current. Key Features 2000W continuous pure sine power with 6000W peak capacity Combination pure sine wave inverter, automatic battery charger, and AC auto-transfer switch Built-in smart battery charger with 7 selectable battery type settings Multi-stage smart charger with charger current control switch Auto gen start feature Low-frequency transformer with isolated input and output design Marine and industrial grade build Specifications Rated Power: 2000W continuous Peak Power: 6000W Input Voltage: 12V DC Output Voltage: 110V / 120V AC Output Waveform: Pure sine wave (stable frequency and voltage, small ripple) Topology: Low-frequency transformer, isolated input/output AC Input Voltage Range: 80–140VAC / 165–265VAC Transfer Time: <12ms (built-in AC bypass relay) Charging Stages: 4-stage progressive, adjustable voltage and current Battery Type Settings: 7 selectable Dimensions: (approx) 17.01" × 9.53" × 4.80" Package Size: 20"x12.5"x9" Unit Weight: 35.27 lbs Battery Compatibility Designed for 12V battery systems Seven-type battery selector for matching different battery chemistries Battery charging activation mode to avoid damaging a deeply depleted battery during charging Charging Function Integrated AC-to-DC battery converter charger Recharges from shore power, generator, or a standard home outlet 4-step progressive charging with adjustable charge voltage and current Charger current control switch Protection Features AC and DC input high and low voltage protection Over-current protection Overload protection Over-temperature protection Output short-circuit protection Build & Performance Marine and industrial grade construction Low-frequency transformer with isolated input and output Super low no-load power loss to save battery energy effectively Built-in AC bypass relay (<12ms) for continuous AC output Ultra-wide commercial power input voltage (80–140VAC / 165–265VAC) Generator automatic energy distribution technology to use generator power efficiently and reduce configuration Compatibility This inverter charger is designed for 12V electrical systems and 110V/120V AC applications. Solar and renewable energy storage systems Off-grid power setups RV, motorhome, and camper van installations Commercial vehicle and mobile power Emergency and backup power Installation Notes Ensure compatibility with your battery system and electrical components Use appropriate wiring, fusing, and system protection Install in a properly ventilated area Professional installation is recommended Product Highlights 2000W 12V low-frequency inverter charger with pure sine output Integrated inverter, charger, and AC transfer switch in one unit 7 selectable battery types with 4-stage smart charging Auto gen start and generator energy distribution Marine and industrial grade for van, RV, off-grid, and backup systems

The mid-size shower we put in our own van builds. After years of installing every shower stall on the market — and warrantying too many cracks, leaks, and rust spots — we started spec'ing our own. The Vankea 28" is the size most 144" Sprinter builds and tight ProMaster layouts end up choosing. Roomy enough to stand and turn in, narrow enough to leave wall space for the kitchen, closet, and bench you actually need. Why we put this in our own builds Most van showers fail in the same places. Fiberglass cracks from road vibration. Plastic stalls warp. Sealant lines split after a season of travel. We got tired of warrantying other people's products, so we built one we trust. Aluminum panels, not fiberglass. Won't crack from vibration. Won't rust. Powder-coated finish. Easy to wipe clean. Doesn't grow mold the way porous surfaces do. Telescoping height. Adjusts to fit standard and high-roof builds — 73" minimum, extends to 78" (6'6") maximum. Rear plumbing cavity. Water lines hide inside the wall, so the finished bathroom looks clean — not like a DIY project. Flat-packs for shipping, bolts together with the included hardware. No custom fabrication. Light. 53 lbs vs. 150+ lbs for comparable fiberglass units. Your van's payload thanks you. Key Specifications Width: 28" (720mm) Depth: 26¼" at base, tapering to 24½" mid-height, 20" at top — width stays consistent front to back Height: 73" minimum, 78" (6'6") maximum — telescoping, adjusts for standard and high-roof layouts Weight: 53 lbs Shower pan: 26½" × 29" × 5¼" tall Entry opening: 23½" wide × 68" tall Drain: Pre-cut for standard 2" RV/marine drains Material: Full-body powder-coated aluminum Door opening: Front-facing, works with roller or retractable shower doors Plumbing: Integrated rear cavity for hidden water-line routing Design: Engineered in the USA, manufactured overseas to our specifications Will this fit my van? Designed for high-roof full-size cargo vans: Mercedes Sprinter — 144 / 170 / EXT high-roof models (a popular pick for 144 builds where wall space is tight) Ford Transit — high-roof models Ram ProMaster — high-roof models (fits flush against ProMaster's flat walls) Before you buy, check that your van has: Floor-to-ceiling clearance of at least 74 inches (room for the 73" minimum height plus mounting and the 5¼" pan) Available wall width of at least 29 inches Wall depth clearance of at least 27 inches (for the rear plumbing cavity) Entry doorway clear of 23½" × 68" for the shower opening Not sure if it fits? Send us a message before you order. The same team that builds the vans answers the emails — we'll help you confirm it works for your layout. *Aftermarket component not affiliated with Mercedes-Benz, Ford, or Ram. What's in the box Aluminum enclosure panels (interlocking, telescoping body) Integrated shower pan with pre-cut 2" drain hole Front channel and trim Stainless steel mounting hardware Step-by-step assembly instructions Not included (so you can plan your build): Shower door Faucet, mixer, showerhead Drain hardware Sealant (use automotive-grade silicone or urethane) Water lines and fittings Installing it If you've done a van interior before, this is a 2-person, half-day job. If it's your first build, plan a full day and have a friend help with panel alignment. Ships flat-packed — inspect for freight damage before signing for delivery Pre-drilled mounting points for faster installation Professional plumbing installation recommended for water-line connections Compatible with roof vents and bathroom fans for moisture control Use automotive-grade silicone or urethane sealant for a watertight finish Shipping & Delivery Shipping method: Freight shipping or local pickup depending on location Packaging: Ships flat-packed in reinforced protective packaging On delivery: Inspect for freight damage before signing — report any issues to us within 24 hours Maintenance & care Wipe down after each use to keep the powder coating fresh. Use: Mild soap, dish soap, or Simple Green Avoid: Bleach, abrasive scrubbers, citrus-based cleaners — these will dull the finish over time Regular wipe-down prevents soap scum and extends the life of the finish Who this is for Builders working with limited wall width (144" Sprinter, ProMaster, Transit) Full-time van life and extended off-grid travel Builders who want a real wet bath without sacrificing the rest of the layout Anyone replacing a cracked or leaking fiberglass stall About us — why trust this product? We're a working van conversion shop. We've built and supplied parts for dozens of custom van builds, and we still build vans today. Every product we sell is something we either use ourselves or install for our customers. If we wouldn't put it in our own van, we don't sell it. Questions about fitment, installation, or what to pair this with? Reach us directly — the same team that builds the vans answers the emails.

The Reality of Van Life with a Full Crew: Why We Built the Duo XR Picture this: You’ve just spent three days off-grid in the desert or parked by the beach. The scenery is unbeatable, but the reality of traveling with a full crew—kids, dogs, maybe even a cat—is officially setting in. The kids are tracking in sand. The dogs are shaking off dust and jumping onto the seats with muddy paws. If you have standard black leather seats, you already know the sinking feeling. Every single grain of sand, dusty footprint, and dog hair is suddenly the loudest thing in your van. If you have standard vinyl, you're wincing every time the dog's claws dig in to get comfortable. We know this because we’ve lived it. When you travel with three kids, two big dogs, and two cats, you quickly realize that most van interiors are built for photoshoots, not for real life. That is exactly why we created the NovaLux Duo XR Swivel Seat-to-Bed System. We stopped asking, "What looks best in a showroom?" and started asking, "What actually survives a family road trip?" Here is how the Duo XR changes the game on the road: The Drive: You're four hours into a cross-country haul. Instead of the typical foam-only van seat that leaves your lower back aching, you are riding on an active coil-spring structure. It delivers the kind of targeted body support you usually only get in a high-end captain's chair. The Campout: You’ve finally parked. Instead of everyone cramming into the front, you pull the mechanical lever. The seats instantly glide backward on their tracks to open up floor space, and swivel a full 360 degrees to face the cabin. Suddenly, you have a cohesive living room. The Cleanup: Somebody spills a drink. The dog shakes off a layer of trail dust. Instead of panicking, you just wipe it away. The heavy-duty brown/gray woven fabric is waterproof, scratch-resistant, and specifically color-calibrated to camouflage the inevitable dirt of van life. The Night: When it's time to sleep, there are no blown fuses or dead batteries to worry about. A simple, zero-failure mechanical lever drops the seats completely flat, instantly transforming your passenger space into a 33" × 58" sleeping platform. You don't have to compromise between a refined interior and a functional, life-proof cabin. Upgrade to a seat that actually handles the dirt, the dogs, and the miles. NovaLux Duo XR Swivel Seat-to-Bed System. The flagship dual-chair configuration in the NovaLux line — passenger seating by day, a flat sleeping platform by night. Built around a heavy-duty, waterproof, kid- and pet-friendly woven fabric, an active spring support structure, and a full 360-degree swivel for builders demanding long-haul support and a life-proof interior. About the Duo XR The Duo XR sits at the top of the NovaLux range. Where the Duo RS gives you a strong daily setup, the XR upgrades the experience: featuring a heavy-duty brown/gray fabric engineered specifically for families, combined with an active coil spring structure instead of standard foam. Rigorously tested by our own crew of three kids, two large dogs, and two cats, this material choice solves real van life problems. We know firsthand that black leather highlights every grain of sand, dust, and footprint, and that pets can easily scratch standard vinyl. We selected this specific textile because it is waterproof, scratch-resistant, and expertly hides the mess while maintaining a premium feel. The internal springs provide targeted support on long drives and hold their shape through years of heavy use. With a full 360-degree swivel and a sliding base, each chair adapts instantly to forward-facing transit, rear-facing lounge mode, or anywhere in between. Life-Proof Fabric. Waterproof, scratch-resistant brown/gray textile that expertly conceals sand, dust, and footprints for a worry-free, family-ready cabin. Coil-Spring Support. Underlying active coil structure delivers targeted body support, eliminating the "sinking" feeling of foam-only builds on multi-hour drives. 360-Degree Swivel & Slide. Each chair rotates a full 360 degrees and glides on its attached base for precise fore/aft positioning. Mechanical Lever Operation. Manual steel levers control recline, slide, and swivel — zero electrical wiring, zero power draw, and zero electronic failure points. Multi-Stage Recline. Converts smoothly from upright transit seating to a relaxed lounge angle, down to a fully flat bed. Frame-Mounted Seatbelts. Integrated 3-point belts anchored directly to the reinforced steel frame. Key Specifications Configuration: Dual chair, convertible to bed Color / Upholstery: Brown/gray heavy-duty, waterproof, scratch-resistant fabric Cushioning: Active spring support structure with high-density foam top layer Bed Dimensions: 33" × 58" (with integrated extension pad). Optimized for compact van layouts. Swivel Range: 360-degree rotation. Supports forward and rear-facing layouts for versatile interior orientation. Slide: Seat glides on attached base for fore/aft adjustment Operation: Manual steel levers for recline, slide, and swivel Belts: Integrated 3-point seat belts, frame-mounted Recline: Multiple positions — upright, lounge, full flat bed Frame: Reinforced steel Features & Design The Duo XR is engineered for builders who want a rugged, family-ready interior and flexible cabin orientation without electronic complexity. Long-Haul Endurance: The combination of coil springs and breathable, heavy-duty fabric over high-density foam prevents driver and passenger fatigue on multi-day routes. Instant Cabin Reconfiguration: Full rotation lets each chair face forward for transit, rearward for lounging with the rest of the cabin, or sideways for galley conversations. Sliding Base: Each seat glides forward and backward on its base—instantly open up legroom, adjust sightlines, or clear floor space for bed conversion. 100% Mechanical Controls: Mechanical operation throughout. No power draw, no wiring runs, no blown fuses. Family & Pet-Ready Finish: Waterproof, scratch-resistant surfaces built to handle kids, dogs, and muddy gear while maintaining a clean aesthetic alongside your interior build. Vehicle Compatibility Designed for floor-mounted installation in: Mercedes Sprinter Ford Transit Ram ProMaster Note: Verify floor structure and mounting points before installation. Requires secure structural anchoring. *Aftermarket component not affiliated with Mercedes-Benz, Ford, or Ram. Vehicle names are for fitment reference only What's Included & Installation 2 × XR Chairs (brown/gray heavy-duty fabric, spring support) 2 × Swivel Bases (360-degree, slide-equipped) Seat-to-bed folding hardware with integrated extension pad Mounting hardware kit Add-ons available separately: Floor Base and Floor Track mounting components — required for installations.

The NovaLux Solo CPT is a fully motorized 12V captain's seat built for camper van and custom conversion builds. It includes heated seats, ventilation, a built-in massage function, and dual USB-A/USB-C charging on the side console. The 20" seat base is sized to fit standard van aisles without crowding cabinetry. About the Seat Most van captain's chairs come from one of two places: rigid utility seats or oversized motorhome chairs that eat your aisle space. The Solo CPT sits between those — a motorized seat with full electric adjustments, sized for van clearances. Sized for vans: 20" seat base fits between Sprinter, Transit, and ProMaster wall liners without blocking the aisle or galley. Fully motorized: No manual levers. Recline, tilt, slider, and leg-rest all run off a 12V control panel on the side. Swivels 360°: Built-in heavy-duty swivel base turns the cab into part of the living space when parked. Ordering: Left, Right, or Pair The Solo CPT comes in driver-side (left) and passenger-side (right) configurations. You can order them as a pair for a full cab setup, or buy them separately if you only need one side. Both come in the beige finish. Left-hand (driver-side profile): Available individually. Right-hand (passenger-side profile): Available individually. Finish: Beige diamond-perforated upholstery. Order check: Confirm driver vs. passenger orientation at checkout so the seat matches the side you're installing on. 12V Electrical Features Heated seat: Multi-level heating in the cushion and backrest. Ventilation: Airflow channels through the perforated upholstery for warm-weather use. Massage function: Built into the backrest, controlled from the side panel. USB charging: Dual USB-A and USB-C ports on the side console. Power adjustments: Electric controls for backrest recline, cushion tilt, leg-rest, and forward slider. Motorized leg-rest: Deploys and retracts electrically. 360° swivel base: Heavy-duty mechanism built into the seat. Adjustable headrest: Side wings deploy for sleep support and retract for driving. Height adjusts independently. Upholstery: Diamond-perforated, flame-retardant, double-stitched. Technical Specs Seat cushion width: 20 inches. Total width (armrest to armrest): 24 inches. Backrest width: 24 inches. Seat base / housing width: 24 inches. Total depth: 24 inches. Total height: 44 inches (upright, cushion to top of headrest). Weight: 96 lbs. Factor into your payload calculation. Electrical: 12V hookup required for motorized, heating, ventilation, massage, and USB functions. Includes inline fuse and 2-pin plug-and-play harness. Frame: Powder-coated reinforced steel. Shipping & Installation Box dimensions: 31" × 16" × 37". Box weight: 65lbs Delivery: Ships via heavy freight on a pallet. Installation: Professional installation recommended to maintain warranty and ensure proper structural mounting.

Experience off-grid comfort with the Cryonex X700 Roof Top AC Unit (12V). This ultra-low profile (5.8") air conditioning system is specifically engineered for stealth camper vans and mobile workspaces. Operating directly on 12V DC, it provides high-efficiency cooling without the need for an inverter. Why Choose the Cryonex X700? (The Off-Grid Advantage) Stop letting the summer heat dictate your travel schedule. The Cryonex X700 is a game-changer for van builders who refuse to compromise on comfort. Unlike traditional 110V units that require massive inverters, this unit runs directly off your 12V system. Flush-Mount Interior: The low-profile internal plenum sits tight against your ceiling, preserving critical headroom in your build. Stay Stealthy: The ultra-slim 5.8" exterior profile ensures you can still clear low garages and maintain a low-profile look. Superior Cooling Power: 8,200 BTU output allows you to drop cabin temperatures in minutes. Battery Friendly: Specifically tuned for Lithium (LiFePO4) systems to maximize off-grid runtime. Technical Specifications Cooling Capacity: 8,200 BTU (2400 W) Noise Level: ≤45dB (Ultra-Quiet Mode) Exterior Dimensions (Outdoor Condenser Unit): 27.5" × 27.5" × 5.8" (70cm × 70cm × 14.9cm) | H × W × D Indoor Unit — Overall: 26.4" (W) × 15.75" (H) (67cm × 40cm) Cover Plate (Outer Panel): 22.83" (W) × 13.78" (H) (58cm × 35cm) Control Panel (Inner Panel): 15.75" (W) × 7.87" (H) (40cm × 20cm) Internal Cut-out Size: Approx. 11.75" (W) × 7.5" (H) | Verify with included template before cutting Weight: 53 lbs | Lightweight UV-resistant polymer Chassis Refrigerant: Non-Ozone Depleting R134a (Pre-Charged) Installation & Trim Options The X700 is designed for a professional, flush-mount finish. We understand that every van build has a different ceiling thickness, which is why this kit is uniquely versatile. Optional Trim Bezel Included: Every unit comes with an optional interior trim piece to cover gap variances between your ceiling material and the AC unit. Headroom Maximized: The internal control panel is engineered for a flush design, making it ideal for high-traffic areas inside the van. Adjustable Airflow: Features three 360-degree adjustable vents to direct cooling exactly where you need it. Note: Professional installation is highly recommended to ensure a watertight seal and proper electrical gauge wiring. Power & Battery Requirements Voltage: 12V DC (Direct Battery Connection) Running Amps: 40A-70A (Typical) Recomended 12V fuse: 80Amps Recommended Battery: 200Ah+ LiFePO4 for optimal performance. Safety: Integrated Low-Voltage Cut-off to protect your battery bank. What's Included 1 × Cryonex X700 12V External AC Unit 1 × Flush-Mount Internal Control Plenum 1 × Optional Interior Trim Bezel (For a seamless finish) 1 × Wireless Remote Control 1 × Full Mounting Hardware & Gasket Kit 1-Year Standard Warranty This product includes our Standard 1-Year Warranty. At Van Parts Outlet, we stand behind our components to ensure your build stays on the road. Coverage: Protects against manufacturing defects and quality issues. Builder Tested: Verified to withstand the rigors of van life and road vibration. Support: Direct access to our California-based technical team for installation help. For full details, visit our Warranty Page.

3000W Pure Sine Wave Inverter/Charger – 12V DC to 110V AC This 3000W Pure Sine Wave Inverter Charger is designed for power conversion and battery charging in camper vans, RVs, and off-grid systems. It converts 12V DC battery power into 110V AC output and includes an integrated charger for use with shore power or generators. The unit is suitable for powering appliances, tools, and electronic devices that require stable AC output. It is designed for use in mobile and off-grid electrical systems. Key Features 3000W continuous power output with 6000W peak capacity Pure sine wave output for stable AC power Integrated inverter and battery charger in one unit Compatible with multiple battery types Fast transfer time between power sources Includes auxiliary remote inverter control panel Specifications Rated Power: 3000W Peak Power: 6000W Input Voltage: 12V DC Output Voltage: 110V AC Output Waveform: Pure sine wave (THD < 3%) Frequency: 60Hz Efficiency: Up to 95% Transfer Time: ≤10ms Dimensions: 19.1" × 10.1" × 6.2" Package Size: 25.5"x13.5"x12.5" Unit Weight: (approx) 35.27 lbs Battery Compatibility Designed for 12V battery systems Compatible with LiFePO4, AGM, GEL, and lead-acid batteries DC input range: 10.8V – 16V Charging Function Integrated AC-to-DC battery charger Supports charging via shore power or generator Adjustable charging current (model dependent, up to 50A) Protection Features Overload protection Over-temperature protection Over-voltage and under-voltage protection Short-circuit protection Automatic recovery function Cooling & Build Forced air cooling system Operating temperature range: -15°C to 50°C Designed for mobile and off-grid environments Compatibility This inverter charger is designed for use in 12V electrical systems commonly found in camper vans, RVs, and off-grid power setups. Camper van electrical systems RV and motorhome installations Solar energy storage systems Backup power systems What’s Included 3000W inverter charger unit Auxiliary remote inverter control panel Installation Notes Ensure compatibility with your battery system and electrical components Use appropriate wiring, fusing, and system protection Install in a properly ventilated area Professional installation is recommended Product Highlights 3000W 12V inverter charger with pure sine output Integrated charging and power conversion system Compatible with multiple battery types Includes remote control panel Designed for van, RV, and off-grid systems

Create a versatile living space with the Swivel Table Hardware Kit – Adjustable Rotating Table Mount. This modular mounting solution is specifically engineered for camper vans and RVs, allowing you to maximize your floor plan with a table that moves when you do. Built with heavy-duty steel for maximum durability. Why Choose This Swivel Mount? (The Ultimate Van Layout Hack) In a small van or RV, every inch of floor space is a premium asset. Fixed tables are a thing of the past—the Swivel Table Hardware Kit allows you to transform your interior from a dining room to a lounge or a workspace in seconds. It’s the essential upgrade for anyone looking for that high-end, custom-built functionality. Total Flexibility: Swivel your table 360 degrees to use it from the driver’s seat, the sofa, or even outside the side door. | Maximizes limited interior square footage Professional Stability: Unlike flimsy folding legs, this heavy-duty steel mount is engineered to stay rock-solid while you work or eat. | Vibration-resistant for life on the road Instant Space: When you're done, simply swing the table out of the way or remove it entirely to open up your hallway. | Modular design for quick stowing Customizable Style: Because it's a hardware-only kit, you have the freedom to mount your own custom tabletop to match your van’s aesthetic. | Compatible with DIY wood or laminate tops Stop tripping over fixed furniture. This mount gives you the freedom to move and the stability you need to live comfortably off-grid. Functional Features & Design The Swivel Table Hardware Kit is a purpose-built solution for creating a mobile workstation or dining area. Designed for durability in off-road and transit conditions. 360-Degree Swivel: Full range of motion for multi-directional positioning. | High-precision rotation points Ergonomic Adjustment: Three large handles allow for quick, tool-free tightening. | Secure manual locking system Space-Saving: Modular design that can be swung out of the way when not in use. | Ideal for small floor plans Wobble-Free Setup: Enhanced stability control via the integrated support bracket. | Professional mounting foundation Technical Specifications Load Capacity: Supports up to 50 lbs (22.7 kg). | Safety rated for heavy laptops and dining Material: High-Strength Steel with a Corrosion-Resistant Powder-Coated Finish. | Rust-proof for long-term vehicle use Adjustment: Adjustable height mechanism with vertical rod and column. | Customizable for different seating heights Fasteners: Industrial-grade M10 and M8 vibration-resistant assembly. | Built to withstand rough road conditions Surface Protection: Includes base plate with anti-scratch plastic backing. | Protects expensive van wall paneling What’s Included Note: This is a Hardware Kit only. Tabletop is not included. 1 × Horizontal Beam 1 × Vertical Rod & 1 × Column 1 × Base Plate with Backing Board 1 × Support Bracket 3 × Adjustment Handles Full Fastener Kit (M10, M8, M4 screws) Compatibility & Installation Universal Fit: Works with most standard swivel table frames and custom DIY tabletops. | Versatile mounting options DIY Friendly: Designed for straightforward mounting to van bulkheads, seat bases, or walls. | Step-by-step hardware assembly Disclaimer: Verify your mounting surface's structural integrity before installation. Professional installation is recommended. This is an aftermarket kit not affiliated with any specific furniture manufacturer.