NovaLux Duo RS 35" Convertible Swivel Seat-to-Bed System. A dual-captain's chair configuration that functions as passenger seating during the day and a flat sleeping platform at night. Designed for full-size cargo vans, it maximizes floor plan efficiency without giving up comfort. About the Duo RS The Duo RS is built around a wide individual captain's chair format. Each seat is 35 inches wide, which gives you real long-haul comfort instead of a cramped bench. Combining your passenger seating and your primary bed into a single modular system frees up floor space for a larger kitchen, gear storage, or a wider aisle. Long-haul ergonomics. High-density foam and synthetic leather, lumbar support, infinite recline. 180-degree swivel. Turns each seat to face the living area or the dashboard. Lockable in forward-facing position when in transit. Integrated 3-point belts. Each chair has 3-point belts anchored directly to the seat frame. Key Specifications Single Seat Size: 35.4" L × 31.5" W × 43.4" H Combined Bed Width: 70.8" flat sleeping surface Swivel Range: 180-degree rotation, lockable in forward position Belts: Integrated 3-point seat belts, frame-mounted Upholstery: Automotive-grade synthetic leather Frame: Reinforced steel Features & Design The Duo RS is built around a multi-functional layout for 144" or 170" wheelbase builds. Infinite Recline: Adjustable backrest supports upright seating, lounging, or sleeping. Ergonomic Support: High-density foam cushioning with lumbar support. Swivel Base: Heavy-duty rotation plate, lockable in forward-facing position for transit. Integrated Belts: Frame-mounted 3-point belts, no wall anchors needed. Low-Profile Footprint: Designed to leave room for galley kitchens or side storage. Vehicle Compatibility Designed for floor-mounted installation in: Mercedes Sprinter — NCV3 and VS30 platforms Ford Transit — high-roof and mid-roof Ram ProMaster — flat-floor builds Note: Verify floor structure and mounting points before installation. Requires secure structural anchoring. *Aftermarket component not affiliated with Mercedes-Benz, Ford, or Ram. Vehicle names are for fitment reference only. What's Included & Installation 2 × Captain's Chairs Seat-to-bed folding hardware Mounting hardware kit Installation Notes: Professional installation is strongly recommended for proper structural mounting. Check local regulations regarding passenger seating in your jurisdiction before installation.

The NovaLux Duo GT is a versatile double seat with seat-to-bed conversion for camper van builds. Designed by van builders for van builders, the Duo GT was built to solve the family-fit problem. Whether you need a passenger row or a 63-inch sleeping platform, it can slide, recline, and expand to fit your layout. The Story: Built for the Van Life Reality Most double seats are designed for motorhomes, leaving van builders with bulky benches that don't fit a modern floor plan. We spent years in the shop realizing that builders needed a seat that was actually versatile. We designed the Duo GT to solve the most common builder headaches: Adjustable Width: Unique to the Duo GT, the seat width adjusts by up to 6 inches to give you the right aisle clearance for your cabinetry. Seat-to-Bed Conversion: Reclining backrests transition into a flat 63-inch sleeping platform — a foundation for your bed system. Dual-Passenger Comfort: Dual adjustable footrests and ergonomic support for everyone in the back. The "GT" represents long-haul comfort. From breathable upholstery to the powder-coated steel frame, every detail was thought through by the team at Big Bear Vans. What's in the Box? (Build Your System) Every van layout is unique. We've made our mounting system modular so you only pay for the hardware your specific build needs. Note: Our hardware is engineered specifically for the NovaLux Duo GT and is not sold separately for other seat brands. Duo GT Double Seat (Core): Includes (1) double seat unit with integrated 3-point seat belts, reclining backrests, and dual adjustable leg rests. + 360° Swivel Base (Optional Add-on): Add this if you need the seat to rotate for a "living room" layout. Includes heavy-duty ball-bearing rotation hardware. + Floor Track Mounting System (Optional Add-on): Add this for a secure floor-mount installation. Includes reinforced aluminum rails. Features Seat-to-Bed Conversion: Reclining backrests convert into a flat 63-inch sleeping platform. Adjustable Ergonomics: Dual adjustable footrests and adjustable seat width up to 6". Integrated Belts: 3-point retractable shoulder belts with retractor mechanism. Material: Durable, breathable, flame-retardant automotive-style upholstery. Dimensions All measurements provided in both metric (mm) and imperial (inches). Refer to the dimension diagram in the product gallery. Upright / Seated Position Overall Height: 1080 mm / 42.5" Seat Width (per seat): 800 mm / 31.5" Bench Width (both seats together): 900 mm / 35.4" Seat Depth (incl. extended footrest): 800 mm / 31.5" — broken down as 200 mm leg rest + 400 mm cushion + 200 mm clearance Seat-to-Floor Height: 450 mm / 17.7" Bed / Reclined Position Total Bed Length: 1600 mm / 63" — 1000 mm / 39.4" seat section + 600 mm / 23.6" footrest extension Bed Surface Height from Floor: 550 mm / 21.7" Total Footprint with Footrest Deployed: 1430 mm / 56.3" — base 830 mm + footrest 600 mm Base Footprint Base Width: 930 mm / 36.6" Technical Specifications Construction: Reinforced steel frame with powder-coated finish. Belts: Integrated 3-point retractable shoulder belts. Total Weight: Seat unit: 185 lbs | Hardware: 35–50 lbs. Factor into your payload calculation. Production & Shipping Built-to-Order: Standard production lead time of 4–6 weeks. Shipping Method: Ships via heavy freight on a pallet. Installation: Professional installation required for proper structural mounting and to maintain warranty. Disclaimer: This is an aftermarket component not manufactured by Mercedes-Benz, Ford, or Ram. Vehicle names are for fitment reference only.

Optimize your mobile kitchen with the Cryonex BC83A 83L Compressor Refrigerator, available in separate 12V DC and 24V DC versions. Choose the voltage version that matches your van, RV, or off-grid electrical system. Designed specifically for the rigors of life on the road, this 3.3 cu ft fridge offers high-capacity storage with a space-saving design that is 5 inches shallower than residential models. It fits perfectly under standard campervan countertops, providing professional-grade cooling without unnecessary inverter losses. Why Choose the Cryonex 83L Fridge? (The Van-Life Kitchen Hero) When you're living in a van, every inch of walkway space is precious. Most people make the mistake of buying "dorm fridges" that stick out into the aisle—the Cryonex BC83A is engineered specifically for vehicle layouts. It offers a massive 83L capacity while maintaining a shallow profile, giving you more room to move and more power to stay off-grid longer. Engineered for Narrow Aisles: At 5 inches shallower than standard compact fridges, this unit sits flush with your cabinetry, keeping your van's walkway clear. | Optimized footprint for Sprinter and Transit builds Inverter-Free Efficiency: This is a native DC compressor fridge. Select the 12V or 24V version that matches your battery system so the refrigerator can run directly from the correct DC supply. | Solar-friendly 50W high-efficiency draw Off-Road Security: Traditional fridge doors fly open on the first bumpy trail. Ours features a heavy-duty integrated locking latch to keep your food secure during off-road adventures. | Built for rugged transit and vibration Whisper-Quiet Comfort: You're sleeping just feet away from your kitchen. We’ve tuned this compressor for ultra-low decibel operation so you can enjoy the silence of the wilderness. | Stealth-optimized acoustic performance Get the storage you need without the bulk. The Cryonex BC83A is the professional choice for a clean, efficient, and spacious mobile kitchen. Key Specifications Capacity: 83 Liters (3.3 cu ft) | Spacious Dual Fridge/Freezer Interior. | Maximum storage for extended trips Dimensions: 781mm x 432mm x 476mm (30.75'' H X 17'' W X 18.75'' D) Voltage Options: 12V DC version or 24V DC version. Choose the version that matches your electrical system; the refrigerator is not an auto-sensing dual-voltage unit. | 50W Rated Power for solar-friendly efficiency. | Low-draw battery protection Cooling System: High-performance compressor using R600a refrigerant for rapid chill cycles. | Fast pull-down temperatures Travel Security: Integrated locking door latch prevents accidental opening on rough terrain. | Positive-lock mechanical closure Stealth Operation: Ultra-low decibel rating designed for quiet comfort in small living spaces. | Vibration-dampened compressor mounting Off-Grid Performance & Efficiency The Cryonex BC83A is engineered for maximum reliability in off-grid environments, connecting directly to your house batteries when the correct voltage version is selected. DC-Native Design: Runs directly on the matching 12V or 24V DC system, depending on the version selected. | Direct battery-to-fridge power path Solar-Friendly: Optimized 50W draw ensures your battery bank lasts longer during extended stays. | Ideal for 200Ah+ lithium systems Thermal Stability: Rapid cooling cycles maintain consistent temperatures even in fluctuating ambient conditions. | High-quality internal insulation barrier Smart Interior Features Versatile Storage: Adjustable internal shelves to customize your layout for bottles and fresh produce. | Removable and easy-to-clean racks Dedicated Freezer: Integrated chiller compartment for reliable temperature control of frozen goods. | Separate internal cooling zone Deep-Pocket Door: Securely holds cans and large beverage containers during transit. | High-sided bins to prevent tipping Compact Profile: Van-specific chassis depth preserves valuable walkway space in narrow aisles. | Industry-leading shallow-mount design Easy Maintenance: Smooth, impact-resistant, non-porous liner for quick sanitizing. | Resists odors and staining Application & Installation Ideal for high-roof van builds, RVs, and marine use. Compatible with Mercedes Sprinter, Ford Transit, Ram ProMaster, and Tiny Home solar systems. Select the 12V or 24V version that matches the vehicle or house electrical system before ordering. Installation Notes: Venting: Proper built-in venting is required for optimal compressor longevity and efficiency. | Ensures heat dissipation from rear coils Wiring: Direct DC wiring with appropriate gauge is recommended for optimal performance. | Minimizes voltage drop Professional Install: Recommended to ensure proper ventilation clearance and electrical safety. | Protects your cabinetry and power system *Performance may vary based on ambient exterior temperatures and ventilation clearance. | Rated for mobile climate variations What’s Included 1 × Cryonex 83L Compressor Refrigerator in the selected voltage version Adjustable Internal Shelving Set DC Power Cable | Pre-fused for safety

The roomiest shower in the Vankea lineup.The Vankea L 36" Aluminum Shower is made for larger van builds where comfort matters more than saving every inch. It gives you a wider entry and more room to move, so the shower feels less cramped and more like a small residential shower.Why this one sellsIf you have the space, the L gives you the most comfortable shower experience in the lineup. The wider 36" body and larger entry make it easier to move around, which is exactly what customers notice most in a van shower.Why you'll like it More room to move: 36" wide with the widest entry in the lineup. Telescoping height: adjusts from 72" to 78". Lightweight aluminum: about 53 lb, corrosion-resistant, and easy to clean. Built-in shower pan: ready for a standard 2" RV/marine drain. Hidden plumbing area: keeps water lines behind the shower wall for a cleaner finish. Door-friendly design: works with roller or retractable-style shower doors. Size at a glance Width: 36" Depth: 26¾" at base, 25" mid-height, 20" at top Height: 72"–78" Entry: 25" × 68" Pan: 36" × 27" × 5¼" Weight: 53 lb Best forChoose the L if you have the space and want the most comfortable shower experience in your van.InstallationShips flat-packed and bolts together with included hardware. Use automotive-grade silicone or urethane sealant where needed for a watertight installation.Fits: Mercedes Sprinter, Ford Transit, and Ram ProMaster high-roof conversions. Check your available width, depth, and ceiling height before ordering.

Bear Power 2000W Pure Sine Wave Inverter/Charger – 12V DC to 110V AC The Bear Power 2000W 12V low-frequency pure sine wave inverter charger transforms DC power, stored by batteries, into AC electricity that can be used to run your tools and appliances at home, in an RV, or in a commercial vehicle. It combines a pure sine wave inverter, an automatic battery charger, and an AC auto-transfer switch in a single marine and industrial grade unit. The built-in AC-to-DC battery converter charger lets you recharge your battery bank from an AC source such as a fuel-powered generator, shore power, or a regular outlet at home. The charger features a seven-type battery selector and 4-stage charging for safely and effectively charging your battery source. Use this product for renewable solar, off-grid, mobile, and emergency backup power applications anywhere that uses 110V or 120V of alternating current. Key Features 2000W continuous pure sine power with 6000W peak capacity Combination pure sine wave inverter, automatic battery charger, and AC auto-transfer switch Built-in smart battery charger with 7 selectable battery type settings Multi-stage smart charger with charger current control switch Auto gen start feature Low-frequency transformer with isolated input and output design Marine and industrial grade build Specifications Rated Power: 2000W continuous Peak Power: 6000W Input Voltage: 12V DC Output Voltage: 110V / 120V AC Output Waveform: Pure sine wave (stable frequency and voltage, small ripple) Topology: Low-frequency transformer, isolated input/output AC Input Voltage Range: 80–140VAC / 165–265VAC Transfer Time: <12ms (built-in AC bypass relay) Charging Stages: 4-stage progressive, adjustable voltage and current Battery Type Settings: 7 selectable Dimensions: (approx) 17.01" × 9.53" × 4.80" Package Size: 20"x12.5"x9" Unit Weight: 35.27 lbs Battery Compatibility Designed for 12V battery systems Seven-type battery selector for matching different battery chemistries Battery charging activation mode to avoid damaging a deeply depleted battery during charging Charging Function Integrated AC-to-DC battery converter charger Recharges from shore power, generator, or a standard home outlet 4-step progressive charging with adjustable charge voltage and current Charger current control switch Protection Features AC and DC input high and low voltage protection Over-current protection Overload protection Over-temperature protection Output short-circuit protection Build & Performance Marine and industrial grade construction Low-frequency transformer with isolated input and output Super low no-load power loss to save battery energy effectively Built-in AC bypass relay (<12ms) for continuous AC output Ultra-wide commercial power input voltage (80–140VAC / 165–265VAC) Generator automatic energy distribution technology to use generator power efficiently and reduce configuration Compatibility This inverter charger is designed for 12V electrical systems and 110V/120V AC applications. Solar and renewable energy storage systems Off-grid power setups RV, motorhome, and camper van installations Commercial vehicle and mobile power Emergency and backup power Installation Notes Ensure compatibility with your battery system and electrical components Use appropriate wiring, fusing, and system protection Install in a properly ventilated area Professional installation is recommended Product Highlights 2000W 12V low-frequency inverter charger with pure sine output Integrated inverter, charger, and AC transfer switch in one unit 7 selectable battery types with 4-stage smart charging Auto gen start and generator energy distribution Marine and industrial grade for van, RV, off-grid, and backup systems

A little more room, without taking over your van.The Vankea S 28" Aluminum Shower is a great middle-ground option for compact van builds. You get more standing room than the XS while still keeping valuable space for your kitchen, cabinets, or seating.Why this one sellsThis is the easy choice for customers who want a proper everyday shower without making the bathroom feel oversized. It gives you a noticeably more comfortable shower than the smallest model while still keeping the van layout efficient.Why you'll like it Compact but comfortable: 28" wide. Telescoping height: adjusts from 73" to 78". Lightweight aluminum: about 53 lb and easy to clean. Built-in shower pan: ready for a standard 2" RV/marine drain. Hidden plumbing area: keeps water lines behind the shower wall. Door-friendly design: works with roller or retractable-style shower doors. Size at a glance Width: 28" Depth: 26¼" at base, 24½" mid-height, 20" at top Height: 73"–78" Entry: 23½" × 68" Pan: 26½" × 29" × 5¼" Weight: 53 lb Best forChoose the S if you want a compact shower that still feels comfortable for everyday use.InstallationShips flat-packed and bolts together with included hardware. Use automotive-grade silicone or urethane sealant where needed for a watertight installation.Fits: Mercedes Sprinter, Ford Transit, and Ram ProMaster high-roof conversions. Check your available width, depth, and ceiling height before ordering.

The Reality of Van Life with a Full Crew: Why We Built the Duo XR Picture this: You’ve just spent three days off-grid in the desert or parked by the beach. The scenery is unbeatable, but the reality of traveling with a full crew—kids, dogs, maybe even a cat—is officially setting in. The kids are tracking in sand. The dogs are shaking off dust and jumping onto the seats with muddy paws. If you have standard black leather seats, you already know the sinking feeling. Every single grain of sand, dusty footprint, and dog hair is suddenly the loudest thing in your van. If you have standard vinyl, you're wincing every time the dog's claws dig in to get comfortable. We know this because we’ve lived it. When you travel with three kids, two big dogs, and two cats, you quickly realize that most van interiors are built for photoshoots, not for real life. That is exactly why we created the NovaLux Duo XR Swivel Seat-to-Bed System. We stopped asking, "What looks best in a showroom?" and started asking, "What actually survives a family road trip?" Here is how the Duo XR changes the game on the road: The Drive: You're four hours into a cross-country haul. Instead of the typical foam-only van seat that leaves your lower back aching, you are riding on an active coil-spring structure. It delivers the kind of targeted body support you usually only get in a high-end captain's chair. The Campout: You’ve finally parked. Instead of everyone cramming into the front, you pull the mechanical lever. The seats instantly glide backward on their tracks to open up floor space, and swivel a full 360 degrees to face the cabin. Suddenly, you have a cohesive living room. The Cleanup: Somebody spills a drink. The dog shakes off a layer of trail dust. Instead of panicking, you just wipe it away. The heavy-duty brown/gray woven fabric is waterproof, scratch-resistant, and specifically color-calibrated to camouflage the inevitable dirt of van life. The Night: When it's time to sleep, there are no blown fuses or dead batteries to worry about. A simple, zero-failure mechanical lever drops the seats completely flat, instantly transforming your passenger space into a 33" × 58" sleeping platform. You don't have to compromise between a refined interior and a functional, life-proof cabin. Upgrade to a seat that actually handles the dirt, the dogs, and the miles. NovaLux Duo XR Swivel Seat-to-Bed System. The flagship dual-chair configuration in the NovaLux line — passenger seating by day, a flat sleeping platform by night. Built around a heavy-duty, waterproof, kid- and pet-friendly woven fabric, an active spring support structure, and a full 360-degree swivel for builders demanding long-haul support and a life-proof interior. About the Duo XR The Duo XR sits at the top of the NovaLux range. Where the Duo RS gives you a strong daily setup, the XR upgrades the experience: featuring a heavy-duty brown/gray fabric engineered specifically for families, combined with an active coil spring structure instead of standard foam. Rigorously tested by our own crew of three kids, two large dogs, and two cats, this material choice solves real van life problems. We know firsthand that black leather highlights every grain of sand, dust, and footprint, and that pets can easily scratch standard vinyl. We selected this specific textile because it is waterproof, scratch-resistant, and expertly hides the mess while maintaining a premium feel. The internal springs provide targeted support on long drives and hold their shape through years of heavy use. With a full 360-degree swivel and a sliding base, each chair adapts instantly to forward-facing transit, rear-facing lounge mode, or anywhere in between. Life-Proof Fabric. Waterproof, scratch-resistant brown/gray textile that expertly conceals sand, dust, and footprints for a worry-free, family-ready cabin. Coil-Spring Support. Underlying active coil structure delivers targeted body support, eliminating the "sinking" feeling of foam-only builds on multi-hour drives. 360-Degree Swivel & Slide. Each chair rotates a full 360 degrees and glides on its attached base for precise fore/aft positioning. Mechanical Lever Operation. Manual steel levers control recline, slide, and swivel — zero electrical wiring, zero power draw, and zero electronic failure points. Multi-Stage Recline. Converts smoothly from upright transit seating to a relaxed lounge angle, down to a fully flat bed. Frame-Mounted Seatbelts. Integrated 3-point belts anchored directly to the reinforced steel frame. Key Specifications Configuration: Dual chair, convertible to bed Color / Upholstery: Brown/gray heavy-duty, waterproof, scratch-resistant fabric Cushioning: Active spring support structure with high-density foam top layer Bed Dimensions: 33" × 58" (with integrated extension pad). Optimized for compact van layouts. Swivel Range: 360-degree rotation. Supports forward and rear-facing layouts for versatile interior orientation. Slide: Seat glides on attached base for fore/aft adjustment Operation: Manual steel levers for recline, slide, and swivel Belts: Integrated 3-point seat belts, frame-mounted Recline: Multiple positions — upright, lounge, full flat bed Frame: Reinforced steel Features & Design The Duo XR is engineered for builders who want a rugged, family-ready interior and flexible cabin orientation without electronic complexity. Long-Haul Endurance: The combination of coil springs and breathable, heavy-duty fabric over high-density foam prevents driver and passenger fatigue on multi-day routes. Instant Cabin Reconfiguration: Full rotation lets each chair face forward for transit, rearward for lounging with the rest of the cabin, or sideways for galley conversations. Sliding Base: Each seat glides forward and backward on its base—instantly open up legroom, adjust sightlines, or clear floor space for bed conversion. 100% Mechanical Controls: Mechanical operation throughout. No power draw, no wiring runs, no blown fuses. Family & Pet-Ready Finish: Waterproof, scratch-resistant surfaces built to handle kids, dogs, and muddy gear while maintaining a clean aesthetic alongside your interior build. Vehicle Compatibility Designed for floor-mounted installation in: Mercedes Sprinter Ford Transit Ram ProMaster Note: Verify floor structure and mounting points before installation. Requires secure structural anchoring. *Aftermarket component not affiliated with Mercedes-Benz, Ford, or Ram. Vehicle names are for fitment reference only What's Included & Installation 2 × XR Chairs (brown/gray heavy-duty fabric, spring support) 2 × Swivel Bases (360-degree, slide-equipped) Seat-to-bed folding hardware with integrated extension pad Mounting hardware kit Add-ons available separately: Floor Base and Floor Track mounting components — required for installations.

The NovaLux Solo CPT is a fully motorized 12V captain's seat built for camper van and custom conversion builds. It includes heated seats, ventilation, a built-in massage function, and dual USB-A/USB-C charging on the side console. The 20" seat base is sized to fit standard van aisles without crowding cabinetry. About the Seat Most van captain's chairs come from one of two places: rigid utility seats or oversized motorhome chairs that eat your aisle space. The Solo CPT sits between those — a motorized seat with full electric adjustments, sized for van clearances. Sized for vans: 20" seat base fits between Sprinter, Transit, and ProMaster wall liners without blocking the aisle or galley. Fully motorized: No manual levers. Recline, tilt, slider, and leg-rest all run off a 12V control panel on the side. Swivels 360°: Built-in heavy-duty swivel base turns the cab into part of the living space when parked. Ordering: Left, Right, or Pair The Solo CPT comes in driver-side (left) and passenger-side (right) configurations. You can order them as a pair for a full cab setup, or buy them separately if you only need one side. Both come in the beige finish. Left-hand (driver-side profile): Available individually. Right-hand (passenger-side profile): Available individually. Finish: Beige diamond-perforated upholstery. Order check: Confirm driver vs. passenger orientation at checkout so the seat matches the side you're installing on. 12V Electrical Features Heated seat: Multi-level heating in the cushion and backrest. Ventilation: Airflow channels through the perforated upholstery for warm-weather use. Massage function: Built into the backrest, controlled from the side panel. USB charging: Dual USB-A and USB-C ports on the side console. Power adjustments: Electric controls for backrest recline, cushion tilt, leg-rest, and forward slider. Motorized leg-rest: Deploys and retracts electrically. 360° swivel base: Heavy-duty mechanism built into the seat. Adjustable headrest: Side wings deploy for sleep support and retract for driving. Height adjusts independently. Upholstery: Diamond-perforated, flame-retardant, double-stitched. Technical Specs Seat cushion width: 20 inches. Total width (armrest to armrest): 24 inches. Backrest width: 24 inches. Seat base / housing width: 24 inches. Total depth: 24 inches. Total height: 44 inches (upright, cushion to top of headrest). Weight: 96 lbs. Factor into your payload calculation. Electrical: 12V hookup required for motorized, heating, ventilation, massage, and USB functions. Includes inline fuse and 2-pin plug-and-play harness. Frame: Powder-coated reinforced steel. Shipping & Installation Box dimensions: 31" × 16" × 37". Box weight: 65lbs Delivery: Ships via heavy freight on a pallet. Installation: Professional installation recommended to maintain warranty and ensure proper structural mounting.