3000W Pure Sine Wave Inverter/Charger – 12V DC to 110V AC This 3000W Pure Sine Wave Inverter Charger is designed for power conversion and battery charging in camper vans, RVs, and off-grid systems. It converts 12V DC battery power into 110V AC output and includes an integrated charger for use with shore power or generators. The unit is suitable for powering appliances, tools, and electronic devices that require stable AC output. It is designed for use in mobile and off-grid electrical systems. Key Features 3000W continuous power output with 6000W peak capacity Pure sine wave output for stable AC power Integrated inverter and battery charger in one unit Compatible with multiple battery types Fast transfer time between power sources Includes auxiliary remote inverter control panel Specifications Rated Power: 3000W Peak Power: 6000W Input Voltage: 12V DC Output Voltage: 110V AC Output Waveform: Pure sine wave (THD < 3%) Frequency: 60Hz Efficiency: Up to 95% Transfer Time: ≤10ms Dimensions: 19.1" × 10.1" × 6.2" Package Size: 25.5"x13.5"x12.5" Unit Weight: (approx) 35.27 lbs Battery Compatibility Designed for 12V battery systems Compatible with LiFePO4, AGM, GEL, and lead-acid batteries DC input range: 10.8V – 16V Charging Function Integrated AC-to-DC battery charger Supports charging via shore power or generator Adjustable charging current (model dependent, up to 50A) Protection Features Overload protection Over-temperature protection Over-voltage and under-voltage protection Short-circuit protection Automatic recovery function Cooling & Build Forced air cooling system Operating temperature range: -15°C to 50°C Designed for mobile and off-grid environments Compatibility This inverter charger is designed for use in 12V electrical systems commonly found in camper vans, RVs, and off-grid power setups. Camper van electrical systems RV and motorhome installations Solar energy storage systems Backup power systems What’s Included 3000W inverter charger unit Auxiliary remote inverter control panel Installation Notes Ensure compatibility with your battery system and electrical components Use appropriate wiring, fusing, and system protection Install in a properly ventilated area Professional installation is recommended Product Highlights 3000W 12V inverter charger with pure sine output Integrated charging and power conversion system Compatible with multiple battery types Includes remote control panel Designed for van, RV, and off-grid systems

Bear Power 2000W Pure Sine Wave Inverter/Charger – 12V DC to 110V AC The Bear Power 2000W 12V low-frequency pure sine wave inverter charger transforms DC power, stored by batteries, into AC electricity that can be used to run your tools and appliances at home, in an RV, or in a commercial vehicle. It combines a pure sine wave inverter, an automatic battery charger, and an AC auto-transfer switch in a single marine and industrial grade unit. The built-in AC-to-DC battery converter charger lets you recharge your battery bank from an AC source such as a fuel-powered generator, shore power, or a regular outlet at home. The charger features a seven-type battery selector and 4-stage charging for safely and effectively charging your battery source. Use this product for renewable solar, off-grid, mobile, and emergency backup power applications anywhere that uses 110V or 120V of alternating current. Key Features 2000W continuous pure sine power with 6000W peak capacity Combination pure sine wave inverter, automatic battery charger, and AC auto-transfer switch Built-in smart battery charger with 7 selectable battery type settings Multi-stage smart charger with charger current control switch Auto gen start feature Low-frequency transformer with isolated input and output design Marine and industrial grade build Specifications Rated Power: 2000W continuous Peak Power: 6000W Input Voltage: 12V DC Output Voltage: 110V / 120V AC Output Waveform: Pure sine wave (stable frequency and voltage, small ripple) Topology: Low-frequency transformer, isolated input/output AC Input Voltage Range: 80–140VAC / 165–265VAC Transfer Time: <12ms (built-in AC bypass relay) Charging Stages: 4-stage progressive, adjustable voltage and current Battery Type Settings: 7 selectable Dimensions: (approx) 17.01" × 9.53" × 4.80" Package Size: 20"x12.5"x9" Unit Weight: 35.27 lbs Battery Compatibility Designed for 12V battery systems Seven-type battery selector for matching different battery chemistries Battery charging activation mode to avoid damaging a deeply depleted battery during charging Charging Function Integrated AC-to-DC battery converter charger Recharges from shore power, generator, or a standard home outlet 4-step progressive charging with adjustable charge voltage and current Charger current control switch Protection Features AC and DC input high and low voltage protection Over-current protection Overload protection Over-temperature protection Output short-circuit protection Build & Performance Marine and industrial grade construction Low-frequency transformer with isolated input and output Super low no-load power loss to save battery energy effectively Built-in AC bypass relay (<12ms) for continuous AC output Ultra-wide commercial power input voltage (80–140VAC / 165–265VAC) Generator automatic energy distribution technology to use generator power efficiently and reduce configuration Compatibility This inverter charger is designed for 12V electrical systems and 110V/120V AC applications. Solar and renewable energy storage systems Off-grid power setups RV, motorhome, and camper van installations Commercial vehicle and mobile power Emergency and backup power Installation Notes Ensure compatibility with your battery system and electrical components Use appropriate wiring, fusing, and system protection Install in a properly ventilated area Professional installation is recommended Product Highlights 2000W 12V low-frequency inverter charger with pure sine output Integrated inverter, charger, and AC transfer switch in one unit 7 selectable battery types with 4-stage smart charging Auto gen start and generator energy distribution Marine and industrial grade for van, RV, off-grid, and backup systems

Optimize your cabin climate with the Cryonex 12V Roof Ventilation Fan. Engineered to fit standard 14” x 14” openings, this high-performance fan provides powerful reversible airflow to exhaust cooking odors or pull in fresh evening air. With its low-profile exterior and intelligent remote control, it is the essential ventilation solution for Sprinter, Transit, and ProMaster conversions. Why Choose the Cryonex Vent Fan? (The Lungs of Your Van) Proper ventilation isn't just about staying cool it's about protecting your van from the destructive effects of condensation and moisture. The Cryonex 12V Vent Fan is a high-performance air exchange system that ensures your living space remains fresh, dry, and comfortable. Whether you're boiling water for coffee or sleeping through a humid night, this fan is your first line of defense. All-in-One Convenience: Unlike other fans on the market, ours comes standard with an integrated blackout curtain and a wireless remote. No need to buy extra accessories for privacy or ease of use. | Complete out-of-the-box solution Smart Climate Management: The built-in thermostat handles the thinking for you. Set your desired temperature, and the fan will automatically adjust its 10-speed motor to maintain it. | Energy-efficient off-grid automation Stealth and Silence: Engineered with a precision brushless motor, this fan delivers high-volume airflow while remaining quiet enough for even the lightest sleepers. | Perfect for urban stealth camping Reversible Airflow: Instantly switch between exhausting hot, stale air and pulling in cool, filtered night air. When paired with a floor or window vent, it creates a powerful cooling cross-breeze. | Maximum cabin air circulation Invest in the health of your build and your own comfort. The Cryonex Vent Fan is the most reliable, feature-packed ventilation upgrade available for modern van conversions. Key Specifications Opening Size: Standard 14” x 14” (355mm × 355mm) | Universal RV & Van Fitment. | Fits existing fan cutouts Exterior Cover: 16.5" x 23.3" (420mm × 593mm) | Low-profile flanged cover Packaging Size: 18" x 24" x 10" Voltage: 12V DC | Energy-efficient for solar and off-grid battery systems. | Low-draw high-performance motor Airflow: 10-Speed Reversible Motor | High-volume CFM for rapid air exchange. | Precise speed control Exterior Profile: 1.85” Height (Closed) / 7.2” Height (Open) | Aerodynamic design minimizes wind noise and drag. | Reduces highway fuel consumption Remote Control: Wireless handheld included for effortless operation from your bed or living area. | Long-range infrared technology Airflow Capacity: High-output ventilation system comparable to premium ~3000 m³/h class fans | Rapid heat and moisture removal Noise Level: Ultra-quiet operation engineered for sleep environments | Low-noise performance across speed levels Power Consumption: Optimized low power draw for extended off-grid use | Battery-friendly efficiency Smart Features & Performance The Cryonex Vent Fan is designed for the high demands of full-time vanlife, featuring automated climate regulation. Smart Temp Control: Thermostat-driven regulation automatically maintains your desired interior temperature. | Intelligent battery management Stealth Mode: Ultra-quiet brushless motor engineered for peaceful sleep and stealth camping. | Vibration-dampened fan blade design Rain Protection: High-impact UV-resistant lid shaped to prevent water ingress during light rain. | Durable all-weather polymer construction Safety Guard: Integrated stainless steel mesh keeps out insects and debris while maintaining airflow. | Corrosion-resistant protective barrier All-Weather Operation: Designed to perform reliably in varying climates including light rain conditions | Year-round ventilation confidence Removable Insect Screen: Easy-clean mesh design for long-term hygiene and airflow efficiency Comfort & Privacy Blackout Curtain: Integrated sliding shade provides total privacy and blocks 100% of morning sunlight. | Essential for late-morning sleepers Reversible Flow: Switch between "Exhaust" to remove heat/steam and "Intake" to pull in cool night air. | Dynamic climate control Interior Comfort Upgrade: Supports consistent airflow circulation to eliminate hot spots and condensation zones Compatibility & Installation Designed for high-roof platforms including Mercedes Sprinter, Ford Transit, Ram ProMaster, and Tiny Homes. Installation Notes: Requires a 12V DC power source. | Simple two-wire connection Sealant: Requires automotive-grade lap sealant (e.g., Dicor) for a waterproof roof bond. | Critical for long-term leak prevention Professional Install: Recommended to ensure structural integrity and a permanent, leak-free seal. | Safeguards your vehicle warranty Roof Thickness Compatibility: 27–80mm (1.06"–3.15") roof/wall thickness | Flexible installation range Drop-In Installation: Direct replacement for existing 14"x14" vents | No complex modifications required *Aftermarket component not affiliated with any specific vehicle manufacturer. | Precision aftermarket ventilation solution What’s Included 1 × Cryonex Roof Vent Fan 1 × Wireless Remote Control | Batteries included 1 × Integrated Blackout Curtain | Pre-installed into trim 1 × Interior Garnish Trim | High-quality aesthetic finish Integrated Control System: Pre-configured smart control functionality for immediate use Upgrade Your Van Comfort Today ✔ Eliminate heat, moisture & condensation instantly ✔ Sleep comfortably with ultra-quiet airflow ✔ Simple install — works with standard 14"x14" openings ⚡ Limited Stock Available — Order Now Before It Sells Out

Experience off-grid comfort with the Cryonex X700 Roof Top AC Unit (12V). This ultra-low profile (5.8") air conditioning system is specifically engineered for stealth camper vans and mobile workspaces. Operating directly on 12V DC, it provides high-efficiency cooling without the need for an inverter. Why Choose the Cryonex X700? (The Off-Grid Advantage) Stop letting the summer heat dictate your travel schedule. The Cryonex X700 is a game-changer for van builders who refuse to compromise on comfort. Unlike traditional 110V units that require massive inverters, this unit runs directly off your 12V system. Flush-Mount Interior: The low-profile internal plenum sits tight against your ceiling, preserving critical headroom in your build. Stay Stealthy: The ultra-slim 5.8" exterior profile ensures you can still clear low garages and maintain a low-profile look. Superior Cooling Power: 8,200 BTU output allows you to drop cabin temperatures in minutes. Battery Friendly: Specifically tuned for Lithium (LiFePO4) systems to maximize off-grid runtime. Technical Specifications Cooling Capacity: 8,200 BTU (2400 W) Noise Level: ≤45dB (Ultra-Quiet Mode) Exterior Dimensions (Outdoor Condenser Unit): 27.5" × 27.5" × 5.8" (70cm × 70cm × 14.9cm) | H × W × D Indoor Unit — Overall: 26.4" (W) × 15.75" (H) (67cm × 40cm) Cover Plate (Outer Panel): 22.83" (W) × 13.78" (H) (58cm × 35cm) Control Panel (Inner Panel): 15.75" (W) × 7.87" (H) (40cm × 20cm) Internal Cut-out Size: Approx. 11.75" (W) × 7.5" (H) | Verify with included template before cutting Weight: 53 lbs | Lightweight UV-resistant polymer Chassis Refrigerant: Non-Ozone Depleting R134a (Pre-Charged) Installation & Trim Options The X700 is designed for a professional, flush-mount finish. We understand that every van build has a different ceiling thickness, which is why this kit is uniquely versatile. Optional Trim Bezel Included: Every unit comes with an optional interior trim piece to cover gap variances between your ceiling material and the AC unit. Headroom Maximized: The internal control panel is engineered for a flush design, making it ideal for high-traffic areas inside the van. Adjustable Airflow: Features three 360-degree adjustable vents to direct cooling exactly where you need it. Note: Professional installation is highly recommended to ensure a watertight seal and proper electrical gauge wiring. Power & Battery Requirements Voltage: 12V DC (Direct Battery Connection) Running Amps: 40A-70A (Typical) Recomended 12V fuse: 80Amps Recommended Battery: 200Ah+ LiFePO4 for optimal performance. Safety: Integrated Low-Voltage Cut-off to protect your battery bank. What's Included 1 × Cryonex X700 12V External AC Unit 1 × Flush-Mount Internal Control Plenum 1 × Optional Interior Trim Bezel (For a seamless finish) 1 × Wireless Remote Control 1 × Full Mounting Hardware & Gasket Kit 1-Year Standard Warranty This product includes our Standard 1-Year Warranty. At Van Parts Outlet, we stand behind our components to ensure your build stays on the road. Coverage: Protects against manufacturing defects and quality issues. Builder Tested: Verified to withstand the rigors of van life and road vibration. Support: Direct access to our California-based technical team for installation help. For full details, visit our Warranty Page.

Optimize your mobile kitchen with the Cryonex BC83A 83L Compressor Refrigerator, available in separate 12V DC and 24V DC versions. Choose the voltage version that matches your van, RV, or off-grid electrical system. Designed specifically for the rigors of life on the road, this 3.3 cu ft fridge offers high-capacity storage with a space-saving design that is 5 inches shallower than residential models. It fits perfectly under standard campervan countertops, providing professional-grade cooling without unnecessary inverter losses. Why Choose the Cryonex 83L Fridge? (The Van-Life Kitchen Hero) When you're living in a van, every inch of walkway space is precious. Most people make the mistake of buying "dorm fridges" that stick out into the aisle—the Cryonex BC83A is engineered specifically for vehicle layouts. It offers a massive 83L capacity while maintaining a shallow profile, giving you more room to move and more power to stay off-grid longer. Engineered for Narrow Aisles: At 5 inches shallower than standard compact fridges, this unit sits flush with your cabinetry, keeping your van's walkway clear. | Optimized footprint for Sprinter and Transit builds Inverter-Free Efficiency: This is a native DC compressor fridge. Select the 12V or 24V version that matches your battery system so the refrigerator can run directly from the correct DC supply. | Solar-friendly 50W high-efficiency draw Off-Road Security: Traditional fridge doors fly open on the first bumpy trail. Ours features a heavy-duty integrated locking latch to keep your food secure during off-road adventures. | Built for rugged transit and vibration Whisper-Quiet Comfort: You're sleeping just feet away from your kitchen. We’ve tuned this compressor for ultra-low decibel operation so you can enjoy the silence of the wilderness. | Stealth-optimized acoustic performance Get the storage you need without the bulk. The Cryonex BC83A is the professional choice for a clean, efficient, and spacious mobile kitchen. Key Specifications Capacity: 83 Liters (3.3 cu ft) | Spacious Dual Fridge/Freezer Interior. | Maximum storage for extended trips Dimensions: 781mm x 432mm x 476mm (30.75'' H X 17'' W X 18.75'' D) Voltage Options: 12V DC version or 24V DC version. Choose the version that matches your electrical system; the refrigerator is not an auto-sensing dual-voltage unit. | 50W Rated Power for solar-friendly efficiency. | Low-draw battery protection Cooling System: High-performance compressor using R600a refrigerant for rapid chill cycles. | Fast pull-down temperatures Travel Security: Integrated locking door latch prevents accidental opening on rough terrain. | Positive-lock mechanical closure Stealth Operation: Ultra-low decibel rating designed for quiet comfort in small living spaces. | Vibration-dampened compressor mounting Off-Grid Performance & Efficiency The Cryonex BC83A is engineered for maximum reliability in off-grid environments, connecting directly to your house batteries when the correct voltage version is selected. DC-Native Design: Runs directly on the matching 12V or 24V DC system, depending on the version selected. | Direct battery-to-fridge power path Solar-Friendly: Optimized 50W draw ensures your battery bank lasts longer during extended stays. | Ideal for 200Ah+ lithium systems Thermal Stability: Rapid cooling cycles maintain consistent temperatures even in fluctuating ambient conditions. | High-quality internal insulation barrier Smart Interior Features Versatile Storage: Adjustable internal shelves to customize your layout for bottles and fresh produce. | Removable and easy-to-clean racks Dedicated Freezer: Integrated chiller compartment for reliable temperature control of frozen goods. | Separate internal cooling zone Deep-Pocket Door: Securely holds cans and large beverage containers during transit. | High-sided bins to prevent tipping Compact Profile: Van-specific chassis depth preserves valuable walkway space in narrow aisles. | Industry-leading shallow-mount design Easy Maintenance: Smooth, impact-resistant, non-porous liner for quick sanitizing. | Resists odors and staining Application & Installation Ideal for high-roof van builds, RVs, and marine use. Compatible with Mercedes Sprinter, Ford Transit, Ram ProMaster, and Tiny Home solar systems. Select the 12V or 24V version that matches the vehicle or house electrical system before ordering. Installation Notes: Venting: Proper built-in venting is required for optimal compressor longevity and efficiency. | Ensures heat dissipation from rear coils Wiring: Direct DC wiring with appropriate gauge is recommended for optimal performance. | Minimizes voltage drop Professional Install: Recommended to ensure proper ventilation clearance and electrical safety. | Protects your cabinetry and power system *Performance may vary based on ambient exterior temperatures and ventilation clearance. | Rated for mobile climate variations What’s Included 1 × Cryonex 83L Compressor Refrigerator in the selected voltage version Adjustable Internal Shelving Set DC Power Cable | Pre-fused for safety

The floor mount we install when a seat just needs to sit where it sits — solid, square, and out of the way. After years of building vans, we learned that not every seat needs to swivel, slide, or do tricks. Sometimes you just need a clean, structural mount that holds the seat at the right height, keeps it level on a ribbed van floor, and bolts into the OEM points without a fight. That's what the Floor Base is for. The Story: Why We Use This Base Not every build needs a seat that swivels, slides, or pops out. Sometimes the right answer is the simplest one — a fixed, structural mount that holds the seat exactly where the layout calls for it and never moves again. The Floor Base is what we reach for in those builds. It brings the seat up to a comfortable height on a ribbed van floor, sits square on the OEM mounting points, and disappears under the cushion once it's in. No mechanism to maintain, no slop to develop, no second-guessing. It's the base we trust for second-row passenger seats, fixed dinette positions, and any build where the priority is strength and simplicity over reconfiguration. What's in the Box Floor Base Unit: One powder-coated steel base, pre-drilled for the standard NovaLux seat pattern. Mounting Hardware: Full set of bolts, washers, and nuts for OEM floor-point installation. Compatibility Note: Designed for use with NovaLux seats. Confirm fit with your specific seat model before ordering. Best For Fixed Seating Positions: Second-row passenger seats that don't need to move. Permanent Installations: Builds where reconfiguration isn't a priority. Maximum Strength: When you want the most rigid possible seat mount. Technical Specifications Material: Powder-coated structural steel Mounting Pattern: Pre-drilled for standard NovaLux seat pattern Installation: Bolts to OEM van floor points — no welding required Hardware: Included Production & Shipping Information Built-to-Order: Standard production lead time of 4–6 weeks. Shipping Method: Ships via standard freight on a secure pallet. Installation: Professional installation recommended to ensure structural integrity and safety compliance. Disclaimer: This is an aftermarket component not manufactured by Mercedes-Benz, Ford, or Ram. Vehicle names are for fitment reference only.

The slide-track system we install when the seat needs to move with the build. Van layouts change — you move the seat forward to make a bed, back to make legroom, out of the way to load gear. The Floor Track is the rail system we use to make that possible without unbolting anything. The Story: Why We Use This Track Van layouts aren't static. The seat that works at a campsite isn't the one that works on the highway, and the seat that works for two passengers isn't the one that works when you need to load a bike. We got tired of unbolting seats every time the build needed to flex. The Floor Track solves that. Twin aircraft-style rails lock the seat into discrete positions along the length of the van, so you can reconfigure the cabin in seconds instead of pulling out a wrench. Slide forward to make a bed. Slide back for legroom. Lift it out of the rail entirely when you need the floor clear. We've been running these in our own builds for years, and they're now the default mounting option we spec for any convertible or multi-position layout. What's in the Box Twin Floor Tracks: Two aircraft-style aluminum rails with multiple locking positions. Locking Pins & Hardware: Steel locking pins, mounting bolts, washers, and nuts for OEM floor-point installation. Compatibility Note: Designed for use with NovaLux seats. Confirm fit with your specific seat model before ordering. Best For Convertible Bed Builds: Seats that need to slide to deploy into a sleeping platform. Multi-Position Seating: Layouts that change between driving, dining, and lounging modes. Swivel + Slide Combos: Swivel seats that also need fore/aft adjustment. Removable Seating: Builds where the seat occasionally needs to come out entirely. Technical Specifications Material: Anodized aluminum track with steel locking pins Lock Positions: Multiple discrete positions along the rail Load Rating: Crash-tested for full seat-belt loads Installation: Mounts to OEM van floor threads — no welding, no drilling the floor pan Hardware: Included Production & Shipping Information Built-to-Order: Standard production lead time of 4–6 weeks. Shipping Method: Ships via standard freight on a secure pallet. Installation: Professional installation recommended to ensure structural integrity and safety compliance. Disclaimer: This is an aftermarket component not manufactured by Mercedes-Benz, Ford, or Ram. Vehicle names are for fitment reference only.

Maximize your interior comfort with the Glacier View 19.5" × 19.5" Bubble Window. Specifically designed for bunk areas and cozy spaces, the unique "bubble" curve expands your living area outward. This provides essential extra headspace and shoulder room, making a significant difference for a more open feel while you relax or sleep. Why Builders Value the "Bubble" (Space & Comfort) Finding the perfect window for areas like bunk beds or kitchenettes is key to a great build. This 19.5" window is a premier solution compact for versatile placement, yet curved to provide that extra room inside that makes your van feel like home. Enhanced Interior Space: The outward curve optimizes your living volume, providing extra shoulder room in bed and more headspace in compact areas. Premium Thermal Efficiency: Built with double-pane insulated acrylic, this window works like a thermos to maintain your preferred cabin temperature in any season. Pristine Living Environment: The advanced double-pane construction helps maintain a dry, clear interior even in humid conditions. Seamless Privacy & Fresh Air: Features a built-in cassette with a 100% blackout shade for restful sleep and a fine-mesh screen that lets you enjoy the breeze while keeping your space clear. All-Weather Ventilation: The top-hinged awning design acts as a protective canopy, allowing you to enjoy fresh air during a gentle rain while keeping your interior perfectly dry. Specifications Window Type: Bubble Awning Window (Top-Hinged, Rain-Safe Ventilation). Cutout Size: Standard 19.5" x 19.5" (495mm x 495mm) square opening. Outer Dimensions: 22" x 20" x 3 1/2" (559mm x 508mm x 89mm). Wall Thickness: Perfect for standard insulated walls between 25mm and 35mm thick. Opening Range: Swings open smoothly up to 90 degrees for maximum airflow. Opening Hardware: Smooth-action stays/struts for stable multi-position ventilation control. Material: High-impact safety acrylic with a durable, corrosion-resistant aluminum frame. Thermal Performance: Double-pane insulated acrylic reduces heat transfer and helps prevent condensation. Weather Resistance: Designed for a tight compression seal to support leak-free performance when properly installed. Safety: Fully road-legal and E-Mark (E4) safety certified for your peace of mind. Approx. Weight: 10.2 lbs. Warranty: 1-Year Manufacturer limited warranty. Advanced Design Features This window is a total climate control solution, engineered to keep your mobile home comfortable year-round. Integrated 2-in-1 System: A pre-installed frame featuring a smooth-gliding blackout blind and a fresh-air mesh screen. Solar Protection: The permanent tint integrated into the acrylic provides daytime privacy while shielding your interior from 99% of UV rays. High-Security Locking: Multi-point internal handles ensure a firm, airtight seal for a quiet and stable ride at highway speeds. Night Ventilation Mode: Includes a secure "fixed-gap" position that allows for safe, continuous airflow while you are parked or sleeping. Vehicle Compatibility Universally designed for high-roof cargo vans with flat or low-curvature panels: Mercedes Sprinter: 2007–Present. Ram ProMaster: 2014–Present. Ford Transit: 2015–Present. DIY Friendly: Ideal for mid and rear-panel mounting in any modern van or camper build. What's Included & Safe Shipping 1 × Glacier View Bubble Window (19.5" × 19.5") 1 x Internal Mounting Ring (Ensures a firm, watertight compression seal) 1 × Interior Trim Frame with Pre-installed Shade and Screen Full Mounting Hardware Kit (All necessary clamps and screws included) Premium Shipping: We use specialized, reinforced packaging to ensure your window arrives in pristine condition. (Shipping Box: ~24" x 24" x 8"). Installation Tips: Wall Optimization: If your van wall is thinner than 25mm, simply add a wooden "picture frame" spacer to ensure the window clamps securely. Watertight Seal: We recommend using a professional adhesive sealant (like Sikaflex 221) to ensure a permanent, weatherproof bond. Precision Cutting: Always verify your interior wall layout and check for structural ribs before beginning your installation. Rust Prevention: After cutting your opening, sand and paint the exposed metal edges to prevent corrosion over time. Why Choose Van Parts Outlet? We are van builders who value quality and precision. Our mission is to ensure your build process is smooth and your adventures are worry-free by providing only the most reliable, builder-tested gear. Expert-Vetted Gear: Every product is selected for its proven durability against road vibration and temperature changes. Technical Support: Our team of builders is available to help you with your installation questions. Precision Data: We provide exact measurements and compatibility guides so you can achieve a perfect fit the first time.