Experience ultimate convenience with the Vantrix Automated Wind Sensor Legless Electric Side-Mounted Awning. This premium powered shade system is designed for high-end camper vans and luxury RV conversions. Featuring a legless, cantilevered design, it provides an unobstructed outdoor living area with the added safety of an automated retraction system. Why Choose the Vantrix Automated Awning? (Luxury Meets Intelligence) Elevate your off-grid experience with the pinnacle of awning technology. The Vantrix Automated Electric Awning isn't just a shade—it's an intelligent extension of your living space. Designed for those who appreciate luxury and peace of mind, this unit handles the hard work for you so you can focus on the view. Effortless Luxury: Forget about manual cranking. With a single touch, your outdoor patio expands or retracts, powered by a high-torque 12V motor. | Seamless integration with your van's power grid Self-Protecting Intelligence: The built-in vibration sensor acts as a 24/7 guard. If a sudden storm or gust hits while you're away on a hike, the awning automatically stows itself to prevent damage. | Smart safety technology for worry-free travel The Unobstructed View: Our legless cantilever design means no more poles to trip over and no obstructed views. You get a completely open 360-degree entryway to your sliding door. | Maximum architectural aesthetic and freedom of movement Stealth and Strength: Housed in a premium architectural-grade aluminum cassette, the awning stays protected and aerodynamic when you're on the highway. | Stealth black finish for a professional, high-end look When you demand the best in safety, convenience, and modern design, the Vantrix Automated Awning is the clear choice for your luxury build. Smart Technology & Legless Design The Vantrix Electric Awning eliminates the need for manual cranking and ground legs, creating a seamless transition from your van to the outdoors. Intelligent Wind Sensing: Integrated vibration sensor automatically stows the awning during sudden gusts to protect your hardware. | 24/7 automated protection system Legless Cantilever Design: Heavy-duty reinforced arms provide overhead support without poles for an unobstructed 360-degree entryway. | Eliminates trip hazards and site obstructions Hands-Free Protection: Automatic self-retraction provides peace of mind while you're away from the vehicle. | Intelligent sensor-driven safety Emergency Manual Override: Includes a built-in manual port for retraction in the event of a power loss. | Reliable backup for off-grid security Technical Specifications Operation: 12V DC Powered Motor | Automatic Extension and Retraction. | High-torque industrial motor Available Sizes: 118" (3M) and 157" (4M) lengths. | Optimized for full-size van wheelbases Extension Depth: Projects up to 8.2 Feet (2.5m). | Expansive square footage for outdoor living Fabric: UV-Resistant PVC-Coated Vinyl | Waterproof and Flame Retardant. | High-durability commercial grade material Housing: Architectural Grade Aluminum Cassette | Rust-Proof Powder Coated Finish. | Weather-sealed protective storage Aesthetics: Stealth Black, low-profile aerodynamic housing. | Matches modern van exterior trim Power & Installation Requirements This unit is designed for professional integration into your van's electrical system. Power Requirement: Dedicated stable 12V DC power source. | Low-draw high-efficiency motor Control: Compatible with the included wall switch or remote control system. | Versatile remote power management System Integration: Can be integrated with most modern van management systems. | Compatible with smart-hub electrical builds Note: Professional electrical routing and installation are highly recommended due to the motorized components and sensor calibration. | Ensures long-term mechanical reliability *Aftermarket component not affiliated with any specific vehicle OEM. What’s Included 1 × Vantrix Electric Awning Unit 1 × 12V High-Torque Motor Assembly 1 × Automated Wind Vibration Sensor 1 × Professional Wiring Harness 1 × Wireless Remote / Wall Switch Kit Full Mounting Hardware | Includes brackets for standard roof rack fitment

Experience premium outdoor protection with the Vantrix Manual Side-Mounted Awning. This heavy-duty manual shade system is specifically engineered for high-roof camper vans, RVs, and vehicle conversions. Designed for reliability in off-grid environments, it features an integrated leg support system for maximum stability. Why Choose the Vantrix Manual Awning? (Simple, Rugged, Reliable) Sometimes, the best solution is the simplest one. The Vantrix Manual Awning is built for the adventurer who wants a massive outdoor living space without the headache of electrical wiring or motor failures. In less than three minutes, you can transform the side of your van into a shaded oasis, protected from the scorching sun and unexpected rain. Bulletproof Reliability: No motors, no sensors, and no wiring—just a high-quality mechanical system that works every single time you need it. | Ideal for long-term off-grid travel Superior Fabric Tech: Our 280g/m² PVC-coated polyester isn't just a "tarp." It’s a UV 50+ barrier that keeps you significantly cooler than the ambient air temperature. | Waterproof and mildew-resistant for all-season use Stealth Aesthetics: When retracted, the slim-line matte black aluminum case looks like part of your roof rack, maintaining your van's clean lines and fuel economy. | Low-profile aerodynamic housing Instant Stability: The integrated telescoping legs deploy instantly and lock into place, giving you the confidence to set up camp on uneven terrain. | Quick-lock ground stabilization Whether you’re working from your van or hosting a trailhead hangout, the Vantrix Manual Awning gives you the coverage you need with the mechanical simplicity you can trust. Features & Simple Operation The Vantrix awning is a low-maintenance solution for van builders, featuring a rugged aluminum case that protects the fabric from UV and road debris. Manual Deployment: Simple 3-minute setup and stowage with no electrical wiring required. | High-reliability mechanical crank Adjustable Pitch: Telescoping legs allow for canopy tilting to ensure proper rain runoff. | Prevents water weight accumulation Stealth Design: Slim-line cassette minimizes wind noise and maintains vehicle fuel efficiency. | Aerodynamic profile for high-roof vans Aesthetics: Professional Stealth Black finish to match modern van builds. | Matte powder-coated finish Technical Specifications Available Sizes: 118" (3M) and 157" (4M) lengths. | Versatile sizing for different wheelbases Extension Depth: Projects up to 8.2 Feet (2.5m) for expansive shade. | Maximum living space coverage Fabric: High-Density 280g/m² PVC-Coated Polyester | Waterproof, UV 50+, and Mildew Resistant. | Industrial-grade durability Housing Material: Heavy-Duty Powder-Coated Aluminum | Rust-Proof & Aerodynamic. | Lightweight structural protection Support: Integrated Adjustable Tension Legs with Quick-Lock ground stabilization. | Variable height for uneven campsites Compatibility & Safety Notes Designed for installation on camper vans equipped with compatible roof racks or specialized mounting brackets: Mercedes-Benz Sprinter (All Wheelbases) Ford Transit (Mid & High Roof) Ram ProMaster (All Wheelbases) Safety Warning: Always retract the awning during high winds (exceeding 15-20 mph) or heavy snowfall to prevent structural damage. | Protects your vehicle and hardware investment *Aftermarket component. Professional installation is recommended to ensure a secure mount to your roof rack system. What’s Included SKU: VTX-AWN-SIDE-MAN-BLK 1 × Vantrix Manual Awning Unit (Selected Size) 1 × Set of Integrated Ground-Support Legs Full Universal Mounting Bracket Kit | Compatible with most flat-surface racks Complete Installation Hardware

Create a versatile living space with the Swivel Table Hardware Kit – Adjustable Rotating Table Mount. This modular mounting solution is specifically engineered for camper vans and RVs, allowing you to maximize your floor plan with a table that moves when you do. Built with heavy-duty steel for maximum durability. Why Choose This Swivel Mount? (The Ultimate Van Layout Hack) In a small van or RV, every inch of floor space is a premium asset. Fixed tables are a thing of the past—the Swivel Table Hardware Kit allows you to transform your interior from a dining room to a lounge or a workspace in seconds. It’s the essential upgrade for anyone looking for that high-end, custom-built functionality. Total Flexibility: Swivel your table 360 degrees to use it from the driver’s seat, the sofa, or even outside the side door. | Maximizes limited interior square footage Professional Stability: Unlike flimsy folding legs, this heavy-duty steel mount is engineered to stay rock-solid while you work or eat. | Vibration-resistant for life on the road Instant Space: When you're done, simply swing the table out of the way or remove it entirely to open up your hallway. | Modular design for quick stowing Customizable Style: Because it's a hardware-only kit, you have the freedom to mount your own custom tabletop to match your van’s aesthetic. | Compatible with DIY wood or laminate tops Stop tripping over fixed furniture. This mount gives you the freedom to move and the stability you need to live comfortably off-grid. Functional Features & Design The Swivel Table Hardware Kit is a purpose-built solution for creating a mobile workstation or dining area. Designed for durability in off-road and transit conditions. 360-Degree Swivel: Full range of motion for multi-directional positioning. | High-precision rotation points Ergonomic Adjustment: Three large handles allow for quick, tool-free tightening. | Secure manual locking system Space-Saving: Modular design that can be swung out of the way when not in use. | Ideal for small floor plans Wobble-Free Setup: Enhanced stability control via the integrated support bracket. | Professional mounting foundation Technical Specifications Load Capacity: Supports up to 50 lbs (22.7 kg). | Safety rated for heavy laptops and dining Material: High-Strength Steel with a Corrosion-Resistant Powder-Coated Finish. | Rust-proof for long-term vehicle use Adjustment: Adjustable height mechanism with vertical rod and column. | Customizable for different seating heights Fasteners: Industrial-grade M10 and M8 vibration-resistant assembly. | Built to withstand rough road conditions Surface Protection: Includes base plate with anti-scratch plastic backing. | Protects expensive van wall paneling What’s Included Note: This is a Hardware Kit only. Tabletop is not included. 1 × Horizontal Beam 1 × Vertical Rod & 1 × Column 1 × Base Plate with Backing Board 1 × Support Bracket 3 × Adjustment Handles Full Fastener Kit (M10, M8, M4 screws) Compatibility & Installation Universal Fit: Works with most standard swivel table frames and custom DIY tabletops. | Versatile mounting options DIY Friendly: Designed for straightforward mounting to van bulkheads, seat bases, or walls. | Step-by-step hardware assembly Disclaimer: Verify your mounting surface's structural integrity before installation. Professional installation is recommended. This is an aftermarket kit not affiliated with any specific furniture manufacturer.

The mid-size shower we put in our own van builds. After years of installing every shower stall on the market — and warrantying too many cracks, leaks, and rust spots — we started spec'ing our own. The Vankea 28" is the size most 144" Sprinter builds and tight ProMaster layouts end up choosing. Roomy enough to stand and turn in, narrow enough to leave wall space for the kitchen, closet, and bench you actually need. Why we put this in our own builds Most van showers fail in the same places. Fiberglass cracks from road vibration. Plastic stalls warp. Sealant lines split after a season of travel. We got tired of warrantying other people's products, so we built one we trust. Aluminum panels, not fiberglass. Won't crack from vibration. Won't rust. Powder-coated finish. Easy to wipe clean. Doesn't grow mold the way porous surfaces do. Telescoping height. Adjusts to fit standard and high-roof builds — 73" at minimum, taller when extended. Rear plumbing cavity. Water lines hide inside the wall, so the finished bathroom looks clean — not like a DIY project. Flat-packs for shipping, bolts together with the included hardware. No custom fabrication. Light. 53 lbs vs. 150+ lbs for comparable fiberglass units. Your van's payload thanks you. Key Specifications Width: 28" (720mm) Depth: 26¼" at base, tapering to 24½" mid-height, 20" at top — width stays consistent front to back Height: 73" minimum (telescoping, adjusts taller for high-roof layouts) Weight: 53 lbs Shower pan: 26½" × 29" × 5¼" tall Entry opening: 23½" wide × 68" tall Drain: Pre-cut for standard 2" RV/marine drains Material: Full-body powder-coated aluminum Door opening: Front-facing, works with roller or retractable shower doors Plumbing: Integrated rear cavity for hidden water-line routing Design: Engineered in the USA, manufactured overseas to our specifications Will this fit my van? Designed for high-roof full-size cargo vans: Mercedes Sprinter — 144 / 170 / EXT high-roof models (a popular pick for 144 builds where wall space is tight) Ford Transit — high-roof models Ram ProMaster — high-roof models (fits flush against ProMaster's flat walls) Before you buy, check that your van has: Floor-to-ceiling clearance of at least 74 inches (room for the 73" minimum height plus mounting and the 5¼" pan) Available wall width of at least 29 inches Wall depth clearance of at least 27 inches (for the rear plumbing cavity) Entry doorway clear of 23½" × 68" for the shower opening Not sure if it fits? Send us a message before you order. The same team that builds the vans answers the emails — we'll help you confirm it works for your layout. *Aftermarket component not affiliated with Mercedes-Benz, Ford, or Ram. What's in the box Aluminum enclosure panels (interlocking, telescoping body) Integrated shower pan with pre-cut 2" drain hole Front channel and trim Stainless steel mounting hardware Step-by-step assembly instructions Not included (so you can plan your build): Shower door Faucet, mixer, showerhead Drain hardware Sealant (use automotive-grade silicone or urethane) Water lines and fittings Installing it If you've done a van interior before, this is a 2-person, half-day job. If it's your first build, plan a full day and have a friend help with panel alignment. Ships flat-packed — inspect for freight damage before signing for delivery Pre-drilled mounting points for faster installation Professional plumbing installation recommended for water-line connections Compatible with roof vents and bathroom fans for moisture control Use automotive-grade silicone or urethane sealant for a watertight finish Shipping & Delivery Shipping method: Freight shipping or local pickup depending on location Packaging: Ships flat-packed in reinforced protective packaging On delivery: Inspect for freight damage before signing — report any issues to us within 24 hours Maintenance & care Wipe down after each use to keep the powder coating fresh. Use: Mild soap, dish soap, or Simple Green Avoid: Bleach, abrasive scrubbers, citrus-based cleaners — these will dull the finish over time Regular wipe-down prevents soap scum and extends the life of the finish Who this is for Builders working with limited wall width (144" Sprinter, ProMaster, Transit) Full-time van life and extended off-grid travel Builders who want a real wet bath without sacrificing the rest of the layout Anyone replacing a cracked or leaking fiberglass stall About us — why trust this product? We're a working van conversion shop. We've built and supplied parts for dozens of custom van builds, and we still build vans today. Every product we sell is something we either use ourselves or install for our customers. If we wouldn't put it in our own van, we don't sell it. Questions about fitment, installation, or what to pair this with? Reach us directly — the same team that builds the vans answers the emails.

A real shower for your van — built by people who actually build vans. We've spent the last several years building custom van conversions. After installing every shower stall on the market — and dealing with the cracks, leaks, and rust that come with most of them — we started spec'ing our own. The Vankea 32" Aluminum Shower is what we now put in our own builds. It's the size most full-size van layouts ask for: roomy enough to stand and turn in, small enough to leave space for the rest of your build. Why we put this in our own builds Most van showers fail in the same places. Fiberglass cracks from road vibration. Plastic stalls warp. Sealant lines split after a season of travel. We got tired of warrantying other people's products, so we built one we trust. Aluminum panels, not fiberglass. Won't crack from vibration. Won't rust. Powder-coated finish. Easy to wipe clean. Doesn't grow mold the way porous surfaces do. Telescoping height. Adjusts to fit standard and high-roof builds — 76" at minimum, taller when extended. Rear plumbing cavity. Water lines hide inside the wall, so the finished bathroom looks clean — not like a DIY project. Flat-packs for shipping, bolts together with the included hardware. No custom fabrication. Light. 53 lbs vs. 150+ lbs for comparable fiberglass units. Your van's payload thanks you. Key Specifications Width: 32" (820mm) Depth: 26¼" at base, tapering to 24½" mid-height, 20" at top — width stays consistent front to back Height: 72" minimum (telescoping, adjusts taller for high-roof layouts) Weight: 53 lbs Shower pan: 32½" × 25¾" × 5¼" deep Entry opening: 23½" wide × 68" tall Drain: Pre-cut for standard 2" RV/marine drains Material: Full-body powder-coated aluminum Door opening: Front-facing, works with roller or retractable shower doors Plumbing: Integrated rear cavity for hidden water-line routing Design: Engineered in the USA, manufactured overseas to our specifications Will this fit my van? Designed for high-roof full-size cargo vans: Mercedes Sprinter — 144 / 170 / EXT high-roof models Ford Transit — high-roof models Ram ProMaster — high-roof models (fits flush against ProMaster's flat walls) Before you buy, check that your van has: Floor-to-ceiling clearance of at least 77 inches (room for the 76" minimum height plus mounting and the 5¼" pan) Available wall width of at least 33 inches Wall depth clearance of at least 27 inches (for the rear plumbing cavity) Entry doorway clear of 23½" × 68" for the shower opening Not sure if it fits? Send us a message before you order. The same team that builds the vans answers the emails — we'll help you confirm it works for your layout. *Aftermarket component not affiliated with Mercedes-Benz, Ford, or Ram. What's in the box Aluminum enclosure panels (interlocking, telescoping body) Integrated shower pan with pre-cut 2" drain hole Front channel and trim Stainless steel mounting hardware Step-by-step assembly instructions Not included (so you can plan your build): Shower door Faucet, mixer, showerhead Drain hardware Sealant (use automotive-grade silicone or urethane) Water lines and fittings Installing it If you've done a van interior before, this is a 2-person, half-day job. If it's your first build, plan a full day and have a friend help with panel alignment. Ships flat-packed — inspect for freight damage before signing for delivery Pre-drilled mounting points for faster installation Professional plumbing installation recommended for water-line connections Compatible with roof vents and bathroom fans for moisture control Use automotive-grade silicone or urethane sealant for a watertight finish Shipping & Delivery Shipping method: Freight shipping or local pickup depending on location Packaging: Ships flat-packed in reinforced protective packaging On delivery: Inspect for freight damage before signing — report any issues to us within 24 hours Maintenance & care Wipe down after each use to keep the powder coating fresh. Use: Mild soap, dish soap, or Simple Green Avoid: Bleach, abrasive scrubbers, citrus-based cleaners — these will dull the finish over time Regular wipe-down prevents soap scum and extends the life of the finish Who this is for Full-size cargo van builds (Sprinter, Transit, ProMaster high-roof) Full-time van life and extended off-grid travel Builders who want a wet bath that looks finished, not improvised Anyone replacing a cracked or leaking fiberglass stall About us — why trust this product? We're a working van conversion shop. We've built and supplied parts for dozens of custom van builds, and we still build vans today. Every product we sell is something we either use ourselves or install for our customers. If we wouldn't put it in our own van, we don't sell it. Questions about fitment, installation, or what to pair this with? Reach us directly — the same team that builds the vans answers the emails.

3000W Pure Sine Wave Inverter/Charger – 12V DC to 110V AC This 3000W Pure Sine Wave Inverter Charger is designed for power conversion and battery charging in camper vans, RVs, and off-grid systems. It converts 12V DC battery power into 110V AC output and includes an integrated charger for use with shore power or generators. The unit is suitable for powering appliances, tools, and electronic devices that require stable AC output. It is designed for use in mobile and off-grid electrical systems. Key Features 3000W continuous power output with 6000W peak capacity Pure sine wave output for stable AC power Integrated inverter and battery charger in one unit Compatible with multiple battery types Fast transfer time between power sources Includes auxiliary remote inverter control panel Specifications Rated Power: 3000W Peak Power: 6000W Input Voltage: 12V DC Output Voltage: 110V AC Output Waveform: Pure sine wave (THD < 3%) Frequency: 60Hz Efficiency: Up to 95% Transfer Time: ≤10ms Dimensions: 19.1" × 10.1" × 6.2" Package Size: 25.5"x13.5"x12.5" Unit Weight: 45.6 lbs Battery Compatibility Designed for 12V battery systems Compatible with LiFePO4, AGM, GEL, and lead-acid batteries DC input range: 10.8V – 16V Charging Function Integrated AC-to-DC battery charger Supports charging via shore power or generator Adjustable charging current (model dependent, up to 50A) Protection Features Overload protection Over-temperature protection Over-voltage and under-voltage protection Short-circuit protection Automatic recovery function Cooling & Build Forced air cooling system Operating temperature range: -15°C to 50°C Designed for mobile and off-grid environments Compatibility This inverter charger is designed for use in 12V electrical systems commonly found in camper vans, RVs, and off-grid power setups. Camper van electrical systems RV and motorhome installations Solar energy storage systems Backup power systems What’s Included 3000W inverter charger unit Auxiliary remote inverter control panel Installation Notes Ensure compatibility with your battery system and electrical components Use appropriate wiring, fusing, and system protection Install in a properly ventilated area Professional installation is recommended Product Highlights 3000W 12V inverter charger with pure sine output Integrated charging and power conversion system Compatible with multiple battery types Includes remote control panel Designed for van, RV, and off-grid systems